Products
Mersen
Mersen Introduces Dual Fuse Series for PV

Mersen Introduces Dual Fuse Series for PV

Mersen’s HP10M and HP15M Dual Fuse series are designed specifically for the protection of enhanced photovoltaic systems employing increased string current aggregation. Their precision resistance matched fuse construction ensures balanced load sharing, making them ideal for continuous temperature and current cycling withstand adding to system longevity. The 1000VDC-rated HP10M and 1500VDC-rated HP15M, designed for low minimum breaking capacity capabilities of 1.35 times the fuse rated current value, allow for safe circuit interruption under typical low fault current conditions produced by PV arrays. The tin-plated Crimp Cap (CC) wire-crimpable and solderable terminals accept #8 AWG stranded copper PV wire.

Mersen’s HP10M and HP15M Dual Fuses are part of the HelioProtection® family of products. Mersen Products marked with the HelioProtection brand name have been tested and certified to the latest industry standards for use in photovoltaic applications and guarantee the level of performance required by the PV industry.
Kraloy JBox Largest Size Junction Boxes
advertisement
Emerson Cable Supports Help Electricians Meet NEC Code Requirements in Vertical Raceways

Emerson Cable Supports Help Electricians Meet NEC Code Requirements in Vertical Raceways

Emerson offers the industry’s widest selection of O-Z/Gedney™ cable supports for use with RMC, IMC, EMT and wire armored cable. Utilizing a pOZi-grip™ Wedging Plug significantly improves their holding power without damaging the jacket or cable insulation. The body’s knurled insulating surface securely grips the cable.
STEEL T-BOX for suspended ceiling grids

STEEL T-BOX for suspended ceiling grids

Arlington’s UL Listed STEEL T-Box is the economical way to mount fans/fixtures, smoke/carbon monoxide detectors, security cameras, exit signs and emergency lighting,
up to 70 lbs – on a suspended ceiling grid.

For use with metal raceway T-Box mounts on the ceiling grid at the cross or straightaway for convenient placement of equipment!
BURNDY® Flexible Busbar Compression Terminals

BURNDY® Flexible Busbar Compression Terminals

Flexible busbar is a wire replacement solution typically found in control panels, switchboards, transformers and similar applications. The BURNDY® Flexible Busbar (Type BFB) compression terminals are offered in 1-hole and 2-hole options and are installed with the 750 Series of tooling, requiring only 2 die sets to properly install the entire product line.
IDEAL Introduces their new Adjustable Torque Screwdriver

IDEAL Introduces their new Adjustable Torque Screwdriver

Adjustable torque screwdriver used for assembly and maintenance applications in accordance to 2017 NEC.
MENNEKES FM Series Enclosures

MENNEKES FM Series Enclosures

MENNEKES® FM Flush Mount Disconnects have a semi-recessed profile to minimize contaminants and impact damage. Constructed with 316 Stainless Steel and rated IP69K and UL Type 4X, units withstand the rigors of heavy washdown. Switches are available 30A, 60A and 100A in two sizes, also available with IEC switched receptacles.
Mersen's New NEC Video Focuses on New Requirements for "Whole House" Surge Protection

Mersen's New NEC Video Focuses on New Requirements for "Whole House" Surge Protection

Mersen’s new video focuses on code changes in the 2020 National Electrical Code relating to Surge Protective Devices (SPDs). The 2020 NEC requires the addition of Type 1 or Type 2 surge protection to all service supplying dwelling units, such as houses, apartments, mobile homes, dorm rooms, and any other units that provide means of living, sleeping, cooking, and sanitation.
Alignment Markings Slug-Buster® and Standard Round Knockouts
advertisement
Molex Woodhead Products "Nothing Less Than the Best"
advertisement