Products

Electrical Industry New Product News

24 New Products Found

Adjustable IN/OUT™ Fan/Fixture Box fits ceilings up to 1-1/2" thick

Arlington’s IN/OUT BOX for fans, ceiling fixtures is pre-set for 1/2" ceilings but adjusts up to 1-1/2" for varying ceiling thicknesses, ie single or double drywall.
Always accessible screw allows for depth adjustment after
the ceiling's installed.
Complies with 2014 NEC, 314.20 for set back boxes.
Securely joist-mounting in new construction.

Flush Ceiling Installations with Arlington’s Economy Box

Arlington's low cost steel fan/fixture bracket with plastic box delivers super-secure, versatile on-center mounting between joists spaced 16" to 24" in new construction. It’s pre-set for a 1/2" ceiling, but bracket ends adjust for flush installation on ceilings up to 1-1/4" thick. UL rated for 70 lb fan and 150 lb fixture.

Arlington’s RAINBOX™

Arlington’s RAINBOX™ is the raintight, labor- saving solution to installing a fan or fixture exposed to the elements, inside or outside.

•For areas exposed to wind-driven rain and water spray: pool screen enclosures, open porches, lanais
•21.8 cu. in non-metallic box holds up to 70 lb fan or fixture with up to 7" diameter canopies

New from Arlington! Adjustable In/Out™ Box for Ceiling Fixtures

Arlington’s non-metallic IN/OUT BOX for ceiling fixtures is fully adjustable to accommodate varying ceiling thicknesses, like single or double drywall.

The box is pre-set for a 1/2" ceiling...but the depth adjusts up to 1-1/2" before or after the ceiling is in place with an always-accessible depth adjustment screw.

Exterior VAPOR BOXES Protect Against Air Infiltration… Meet Article 402.4 of the ICC… Help Obtain Energy Star Rating

Designed for new construction, Arlington’s non-metallic FR series device and fixture VAPOR BOXES mount directly to a flat EXTERIOR surface without the need to cut an oversized hole in the substrate. They feature interchangeable backs and extension rings.

Obtain Flush Ceiling Installations with Arlington’s NEW FBR423 Economy Fan/Fixture Box with Adjustable Bracket

Arlington’s low cost steel fan/fixture bracket with plastic box delivers super-secure, versatile on-center mounting between joists spaced 16" to 24".

Easy mounting in new construction
Bracket ends adjust for flush installation on ceilings up to 1-1/4" thick.
Pre-set for 1/2" ceiling

Arlington Introduces STEEL version of ONE BOX™

Designed for new construction or retrofit, the NEW 23.0 cubic inch steel ONE BOX™ (catalog # FBS1423) side mounts to a joist for a super-secure, fan-rated installation. It’s UL Rated for fans/fixtures up to 70 lbs. and CSA accepted for fans/fixtures up to 50 lbs.

Arlington’s Wire Grabber™

Wire Grabber™ (#FLG3) delivers secure hanging support for static loads requiring drop wire support (fixtures, boxes, cable tray).

For dry or wet locations, Wire Grabber’s hold on braided wire is unaffected by oil or grease. It holds angular, and other static loads up to 100 lbs. No spring – tightening the screw engages six points of contact.