Arlington Industries, Inc.
Arlington Low Profile Sconce Box
Arlington’s Low Profile Sconce Box offers the time-saving solution to retrofit installations that have shallow wall cavities - or obstructions running behind the wallboard. This 4” diameter non-metallic box installs in an existing 1/2" or 5/8" wall with a 4" hole saw.
Arlington Industries, Inc.
Pop-up Cover/Box Kits for Floors, Countertops
The gasketed, stainless steel or black stainless TRAPDOOR COVERS look great! They close flush with the floor or countertop, preventing damage to the device in the box and minimizing trip hazards in a floor installation. UL rated for floor installations only.
Arlington Industries, Inc.
Arlington Steel SLIDERBAR™
Here is the easy, NEAT way to mount a single or two-gang box between wood or metal studs with non-standard spacing.
Arlington’s steel SLIDERBAR™ looks great and saves about 20 minutes per box over cutting and nailing extra 2x4s.
Intermatic, Inc.
Introducing the New Electronic All-Purpose Contractor Box by Intermatic
Be ready for anything with the new Electronic All-Purpose Contractor Box from Intermatic. Our latest offering is an adaptable, all-in-one solution that serves as an alternative to traditional commercial contactor box installations.
IPEX USA LLC
IPEX Scepter® JBox™ - Easier to Install
The completely redesigned Scepter® JBox™ has added features to make this the easiest box to use – no matter the situation.
IPEX USA LLC
Scepter® JBox™ - Challenging Installations
The new Scepter JBox Hinged Cover opens more than 180° for complete and
easy access to control devices and instruments. NEMA 3R and 4X rated,
the Scepter JBox Hinged cover is ideally suited for indoor and outdoor
use and in wash-down environments.
IPEX USA LLC
INEXO
Andrew Nause, discusses the uses and features of the IPEX INEXO ICF Electrical Boxes.
Arlington Industries, Inc.
Arlington Industries SLIDERBAR™
Here’s the easy, NEAT way to mount a single or two-gang box between wood or metal studs with non-standard spacing.
Arlington’s SL18 steel SLIDERBAR™ looks great and saves about 20 minutes per box over cutting and nailing extra 2x4s.
Arlington Industries, Inc.
Steel T-Box for Suspended Ceiling Grids
F428SC: Can be positioned on the ceiling grid at the cross of the T-rails or on the straight away. For use on premium/reveal edge ceiling tiles, the box height adjusts by removing the tabs with pliers. Plastic hanger. For fixtures (only), up to 50 lbs. Includes 12ft support wire coil, installed NM cable connector, grid cover.