Siemens Industry, Inc.
Today’s EV Chargers Powering Up Functionality
The electric vehicle (EV) market has had a great 2022, reaching
approximately 6% of total U.S. auto and truck sales in the third
quarter. While that might seem a small percentage, consider that it’s up
from just 2.2% during the same quarter in 2020.
Lutron Electronics Co., Inc.
Install 3-way Lighting Control Without Needing Traveler Wires
I’ll bet this has happened to you. You’re elbows deep in a wiring
project, or lost in a trance-like state, figuring out a major
troubleshooting problem.
Suddenly, a tap on the shoulder and a quiet “excuse me” interrupts you, sending a jolt right down your spine.
Honeywell, Inc.
Smoke Detectors and Fire Alarms – Residential, Commercial, Industrial
All homes and workplaces need protection from fire. It’s part of
building codes everywhere. The type of system will vary depending on the
type of building, number of occupants, and intended use of the
structure.
Klein Tools, Inc.
Manufacturers Bringing Bright Ideas to New Flashlights
Flashlights used to be just, well, flashlights – handy tools for
bringing a little illumination to whatever task was at hand. They also
could be a little undependable in the old days. Battery strength was
always a question, especially if they hadn’t been used in a while.
Philips Lighting Co.
Philips Lighting Offers Array of New LED Products
Earlier this year at the Light + Building 2018 trade show in Frankfurt,
Germany, Philips Lighting announced a string of new initiatives aimed at
the transition to more LED lamps as well as the inclusion of LEDs into
the “Internet of Things” (IoT) in homes and buildings worldwide.
First
the company announced IoT platform called Interact, designed to handle
data collected from connected light points, sensors, devices and
systems.
GE Industrial Solutions by ABB
Lighting Automation Still Requires a Contactor
Lighting automation has bells and whistles, but a lighting contactor is
necessary to switch the actual lighting circuits. Properly selecting
lighting contactors can save installation and maintenance costs. What
are some of the important considerations in addition to the correct
voltage and current?