Arlington Industries, Inc.
IN BOX™ Floor Box Kit with Recessed Wiring Device for Existing Floors
The ultra thin flange and recessed wiring device reduce the trip hazard caused by plugs protruding from the box. Includes two low voltage openings with built-in divider, ultra-thin stamped steel flange, flush-to-the-floor, in use slotted cover and blank cover.
Arlington Industries, Inc.
5.5 Inch Floor Box Kit for new concrete floors FLBC5500
For easy, flush installation of a receptacle and low voltage ports in a new concrete floor. Heavy-duty 5.5 inch non-metallic concrete floor box has six conduit hubs, four plugs, and multiple slots for positioning two low voltage dividers in the box.
Arlington Industries, Inc.
Steel Fan/Fixture Box with Fully Adjustable Brackets
Get flush ceiling installations with our heavy duty, plated steel fan/fixture box. It has
an adjustable bracket that mounts securely between joists spaced 16" to 24" o.c. and a score lines on the bracket for ceilings up to 1-1/4" thick.
Arlington Industries, Inc.
Steel Adjustable Bracket with Plastic Box
Low-cost, economical steel fan/fixture bracket with plastic box delivers super secure, versatile on-center mounting between joists 16" to 24".
Arlington Industries, Inc.
Arlington Steel Floor Box Kits
Arlington’s Steel Floor Box Kits are the easy way to install receptacles flush in a new OR existing floor. Designed for flexibility, these kits offer multiple options for the device setup, and 6" metallic covers with flip lids.
Arlington Industries, Inc.
Pop-up Cover/Box Kits for Floors, Countertops
The gasketed, stainless steel or black stainless TRAPDOOR COVERS look great! They close flush with the floor or countertop, preventing damage to the device in the box and minimizing trip hazards in a floor installation. UL rated for floor installations only.
Arlington Industries, Inc.
Arlington Steel SLIDERBAR™
Here is the easy, NEAT way to mount a single or two-gang box between wood or metal studs with non-standard spacing.
Arlington’s steel SLIDERBAR™ looks great and saves about 20 minutes per box over cutting and nailing extra 2x4s.
Arlington Industries, Inc.
Arlington Industries SLIDERBAR™
Here’s the easy, NEAT way to mount a single or two-gang box between wood or metal studs with non-standard spacing.
Arlington’s SL18 steel SLIDERBAR™ looks great and saves about 20 minutes per box over cutting and nailing extra 2x4s.
Arlington Industries, Inc.
Steel T-Box for Suspended Ceiling Grids
F428SC: Can be positioned on the ceiling grid at the cross of the T-rails or on the straight away. For use on premium/reveal edge ceiling tiles, the box height adjusts by removing the tabs with pliers. Plastic hanger. For fixtures (only), up to 50 lbs. Includes 12ft support wire coil, installed NM cable connector, grid cover.