Products

Electrical Industry New Product News

195 New Products Found

Get the COUNTERTOP BOX KIT with options for installing devices

Get your kit with an installed UL Listed tamper and weather resistant (TWR) decorator-style GFCI... Or tamper resistant (TR) receptacle...OR a combo with (TR) receptacle and two USB ports!

The gasketed stainless steel or black TRAPDOOR COVER closes nearly flush with countertop, preventing damage to devices.

Round, ADJUSTABLE Fan/Fixture Box from Arlington

Arlington’s non-metallic IN/OUT BOX™ for fan and fixture installations comes pre-set for a 1/2" ceiling but adjusts for depths up to 1-1/2".

FBA426 mounts securely to a joist in new construction and complies with the NEC for set back boxes.

• UL/CSA Listed
• 2-Hour Fire Rating

LOWEST COST Steel Box for Rough-In in Concrete Block

Arlington’s 4x4 FSCB44 box and single-gang FSCB24 box, are the easiest way to install a steel electrical box inside a concrete block wall. They're the lowest cost concrete block boxes in the industry.

1/2" and 3/4" knockouts...screw hole patterns for 4x4 and two-gang devices in the 4x4 box.

Adjustable IN/OUT™ Fan/Fixture Box fits ceilings up to 1-1/2" thick

Arlington’s IN/OUT BOX for fans, ceiling fixtures is pre-set for 1/2" ceilings but adjusts up to 1-1/2" for varying ceiling thicknesses, ie single or double drywall.
Always accessible screw allows for depth adjustment after
the ceiling's installed.
Complies with 2014 NEC, 314.20 for set back boxes.
Securely joist-mounting in new construction.

NEW! Countertop Box Kits from Arlington

Arlington’s Countertop BOX KITS deliver options for installing a device in a countertop.

Get your FLBT4400 series box with an installed UL Listed decorator-style GFCI or TR receptacle...OR a combo with receptacle and two USB ports!

The stainless steel finish TRAPDOOR COVER closes flush with countertop, preventing damage to devices.

New from Arlington SNAP-TITE® Connectors for RWFMC CONDUIT

Easy SNAP IN installation! Arlington’s one-piece, screw-in Snap-TITE® connectors for 1/2" reduced wall flexible metal conduit (RWFMC) are designed for use in new and old electrical boxes.

• Easy to install. Screw connector to conduit. Snap assembly into box.
• Fully assembled one-piece design fits 3/4" knockout, available with and without ground lug

Mounting Box with installed steel mounting bracket saves time

Designed for cathedral ceilings in new construction the installed bracket on this box eliminates the need to attach a wood 2x4. Pre-drilled for screws…angled ends for easy fitting and centering.

Taller sides allow the 14.5 cubic inch box to fit ceiling angles greater than 80°; mounting surface accommodates large fan canopies.

Save time with Arlington's 90 degree SNAP2IT® Connector

Our 90 DEGREE Snap2It® fittings with adjustable clip save a minute per connector over 2-screw styles, at the SAME COST.

• Easy, snap in installation - NO TOOLS!
• Widest total cable ranges 14/2 to 10/3 AC, MC, HCF, MC continuous corrugated aluminum cable, MCI-A cables (steel and aluminum), AC90, ACG90 and FLEX