Products

Electrical Industry New Product News

260 New Products Found

SB5000 Shock Block: Reliable Electrical Shock Protection for Personnel

The compact Littelfuse Industrial Shock Block® SB5000 protects workers from electrical shock and is available as a 208 V Class A ground-fault circuit interrupter (GFCI). This allows commercial kitchens, construction sites, and other non-dwelling units with wet areas to meet NEC 210.8(B) now for their three-phase loads up to 60 A.

NEW 100 Watt, 14,000 Lumen LED Temporary Area Light

Voltec Power & Lighting introduces our new LED temporary area light. With 14,000 lumen's and only 100 Watts, this highly efficient area light allows you to illuminate the job site while saving on the energy bill. Quality and innovation are what we do best.

Mount Boxes in Non-standard Stud Cavity with Adjustable SLIDER BAR

Arlington’s SliderBar™ box kits mount single or two-gang boxes between wood or metal studs with non-standard spacing, saving about 20 minutes per box.

Available for 12 to 18 or 15 to 24 inch spacing, SliderBar allows installers to position one or more boxes where needed, facing either direction on bar.

Recessed box for wall mount TV Installation

Arlington’s two gang, recessed TVBU505 TV BOX™ mounts TVs and other system components flush against a wall.

For new construction or old work, in walls up to 1-1/2 inches thick, this combo box has power in one side and low voltage in the other for the installation of Class 2 wiring.

cULus Listed

New & Improved LED String Lights by Voltec

Voltec Power & Lighting is proud to introduce the New & Improved LED String Lights. The all new 1,600 lumen's per module LED String Lights are available in 50’ lengths (5 modules/8,000 total lumen's) and 100’ lengths (10 modules/16,000 total lumen's). Each module comes with a heavy duty magnet and carabiner clip for easy to hang design.

Report Explores Shift from Safety Training to Prevention by Design

Littelfuse surveyed over 400 people whose job is either involved in safety or work directly with electricity, to understand the rationale behind why electrical workers often take unsafe actions, as well as the challenges safety professionals and consultants experience when trying to keep these workers safe.

PANELGUARD®: The Return of a Trusted Defender

Protect industrial facilities with PANELGUARD® from Intermatic. Our robust Type 1 and Type 2 SPDs are NEC compliant and deliver up to 7 modes of protection. Installers can place PANELGUARD units at the service entrance or the load side to protect downstream equipment, as well as at individual disconnects, sub-panels and distribution panels.

Now Available: Easy-to-Use Surge Protective Device (SPD) Selection Guide

Surge protective devices (SPDs) need to be sized correctly. If they are sized too low, the system could be susceptible to temporary overvoltages. If they are sized too high, it could be damaging to equipment.

This convenient SPD calculator by Littelfuse will determine an optimal MCOV size for your specific system.