Products
23 New Products Found
Hinged Cover Scepter JBox

Hinged Cover Scepter JBox

The Hinged Cover Scepter JBox opens more than 200° for complete and easy access to devices and instruments.NEMA 3R and 4X rated, it ideally suited for indoor and outdoor industrial, MRO and OEM applications and in wash-down environments. 100% non-metallic, it includes all the features that users have come to appreciate in the Scepter JBox.
Scepter® JBox™ Pole Mount Kit

Scepter® JBox™ Pole Mount Kit

Save time installing a junction box onto utility power poles! Suitable for both indoor and outdoor use, the universal Pole Mount Kit consists of galvanized steel brackets and stainless steel straps and is designed to work with wooden, concrete, steel and fibreglass poles of round, square and octagonal shape up to 15" in diameter.
Scepter JBox…the easiest junction box you’ll ever use!

Scepter JBox…the easiest junction box you’ll ever use!

We’ve completely redesigned the original junction box making the NEW Scepter JBox the easiest box to use – no matter the situation.  The Scepter JBox features an integral gasket, non-metallic fasteners, molded mounting feet, embossed grid-lines and flat cover...all designed to save contractors time and money on the jobsite.
SceptaCon’s New Joint Design

SceptaCon’s New Joint Design

The re-engineered SceptaCon Trenchless Raceway joint contains internal features which gradually stop the spigot during insertion to prevent bottoming out within the bell, avoiding the possibility of over insertion.

SceptaCon is a proven splinelocking system designed for horizontal direction drilling. Approved for a 65’ bend radius – SceptaCon can bend around obstacles like rocks and other utilities.
Kwikon ENT Stub Down

Kwikon ENT Stub Down

The unique Kwikon 90º stub down fitting creates a stub down of ENT without penetrating the form. After the concrete pour, the permanently encased fitting will be flush with the bottom of the slab deck, ready to accept the connection of ENT raceway. The protective seal on the base optimizes Kwikon’s concrete-tight design.
Service Entrance Fittings

Service Entrance Fittings

Scepter® Service Entrance Fittings can be used in both overhead and underground service laterals and are resistant to a wide range of chemicals such as acids, alkalis or salt solutions.  

A complete range of non-corroding PVC service entrance fittings are available, including meter hubs, weather heads and meter offsets.
Kwikon Slab Box with Dual Mount System

Kwikon Slab Box with Dual Mount System

Kwikon® ENT Standard Slab Boxes feature our new dual mounting system.  The corner mounting tabs are uniquely positioned to guide the nails into a position inside the fixture’s trim cover, reducing the threat of visible rust bleeding through the finished ceiling.  Approved  for ceiling fans up to 35 lbs.
Slab Box Installation Made Easy

Slab Box Installation Made Easy

All Deep Round Series Kwikon slab boxes feature our new CORNER MOUNTING TABS which allow contractors to easily nail Kwikon slab boxes to the slab deck.  The angled design guides the nail inside the fixture’s trim cover reducing the threat of visible rust bleeding through the finished ceiling.  Traditional center mount is also available.
23 New Products Found
IPEX JBox Junction Boxes with Hinged Cover
advertisement
Click here for more information on the IPEX Round Floor Box and Stand
advertisement
Click here for more information on IPEX Products
advertisement