N2LED: The New Standard for Reliable Emergency Egress Lighting
During an unanticipated power failure, you need instant-on emergency egress lighting that delivers plenty of brightness without draining the battery before you can secure the safety of workers and equipment. It’s also helpful to have compact emergency lighting that is easy to install in any location – including tight corridors and catwalks – without getting in the way. Plus, it should require minimal maintenance over the months or even years when it may not be needed – and still operate with absolute reliability when it is needed.
Emerson™ has achieved these goals with the energy efficient Appleton™ N2LED Series Emergency Egress Luminaires. Certified for Class I, Division 2 and Zone 2 hazardous locations, the N2LED provides up to 180 minutes of bright white lighting with no degradation in light quality over the full run-time. The enclosed and gasketed design features a compression molded fiberglass reinforced polyester housing (NEMA 4X, IP66) for rugged reliability in areas exposed to dust, dirt, water, marine salts and corrosives.
The master unit of the system is available without or with two light heads, and remote units are available with one or two light heads – providing a choice of one to four light heads for each complete master/remote system. All light heads can be precisely adjusted in the field with no need for resealing – so you can quickly and easily aim emergency lighting for up to four areas, and make further adjustments or relocate the system anytime as your needs change.
Your facility lighting needs to be reliable in day to day operation. In critical situations, that reliability needs to be absolute. Get the assurance you need with Appleton™ N2LED Series Emergency Egress Luminaires by Emerson™, your industrial and hazardous location lighting experts.
Emerson™ has achieved these goals with the energy efficient Appleton™ N2LED Series Emergency Egress Luminaires. Certified for Class I, Division 2 and Zone 2 hazardous locations, the N2LED provides up to 180 minutes of bright white lighting with no degradation in light quality over the full run-time. The enclosed and gasketed design features a compression molded fiberglass reinforced polyester housing (NEMA 4X, IP66) for rugged reliability in areas exposed to dust, dirt, water, marine salts and corrosives.
The master unit of the system is available without or with two light heads, and remote units are available with one or two light heads – providing a choice of one to four light heads for each complete master/remote system. All light heads can be precisely adjusted in the field with no need for resealing – so you can quickly and easily aim emergency lighting for up to four areas, and make further adjustments or relocate the system anytime as your needs change.
Your facility lighting needs to be reliable in day to day operation. In critical situations, that reliability needs to be absolute. Get the assurance you need with Appleton™ N2LED Series Emergency Egress Luminaires by Emerson™, your industrial and hazardous location lighting experts.
