Hubbell Wiring Systems: Twist-Lock® Edge Series with Screwless Termination
Twist-Lock® Edge Series with Screwless Termination
LEDVANCE LLC: ValueLEDâ„¢ UFO High Bay
ValueLEDâ„¢ UFO High Bay
Signify: 3D Printing by Signify - Tailored Luminaires for a Circular Economy
3D Printing by Signify - Tailored Luminaires for a Circular Economy
How to Use the LTC100 Banding Tool with Cutter
Light duty tool tensions and cuts stainless steel banding with widths from 1/4" (6 mm) to 3/8" (9.5 mm) and thicknesses from 0.010" (0.2 mm) to 0.025" (0.6 mm)

Insert the end of the banding through the slots in the tool nose and the mandrel. Slide the tool forward so that the nose approaches the buckle or wing seal. Push and pull the handle to draw the banding through the buckle. When the banding is tight, rotate the tool over the buckle or wing seal. Push the lever forward to cut the banding.
Problems viewing this email? |  Unsubscribe ElectricSmarts Network, 9450 SW Gemini Dr #19902 Beaverton, OR 97008