Product Info

Electrical Industry Product Info

QuickLatch™ with installed strut clip SAVES TIME

Arlington’s heavy duty NM3100 series QuickLatch™ with installed strut clip holds RIGID and EMT securely on strut. Use it like a pipe hanger.

One-piece QuickLatch saves time, about 20 seconds per installation... over 33¢ each at $60.00 per hour labor rate.

Fast and easy to install. Insert the hanger into the strut, twist to lock the pre-installed clip in place then tighten screw to secure QuickLatch to strut. Push RIGID or EMT into the hanger to lock it in place.

UV rated, corrosion resistant for outdoor use
Stainless steel screw
Mounts vertically or horizontally
Screwdriver removal, reusable
Listed for use in environmental air handling spaces

NEW Commercial Grade Low Voltage Mounting Bracket

Arlington’s commercial grade, extra heavy-duty ZINC mounting bracket offers extra rigidity so it won’t bend like plastic. Its threaded holes deliver easy, fast device installation – saving time. And it seats wall plates flush with the mounting surface. Single gang LV1M… for installations of Class 2 low voltage wiring in existing construction.

Arlington's Snap2It® Connectors NOW AVAILABLE in STEEL

Save time with Arlington’s new one-piece Snap2It® STEEL connectors. These new 3/8" steel connectors offer easy, snap in installation in a 1/2" knockout.

Listed for steel and aluminum AC, HCF, MCI and MCI-A cable in the US, and in Canada for AC90 and ACG90, they’re tested to UL 514B, and meet UL ground fault requirements.

Prevent Air Infiltration around Round Ceiling Boxes

Arlington’s round vapor barrier cover prevents air infiltration around ceiling boxes - without the need for a gasket.

VBR1 offers easy installation on round or octagonal, plastic or steel ceiling boxes in new work.

Screws hold cover temporarily in place while drywall’s installed. After the drywall installation remove these screws and install the fan or fixture. SDFA!

Vapor Barrier Covers prevent Air Infiltration around Device Boxes

Arlington’s vapor barrier covers prevent air infiltration around single, and multi-gang boxes without a gasket.

Designed for new work, they offer easy installation on most plastic or steel boxes.