Electrical Industry Rich-Media Product Demos and Videos

Lutron has in-wall sensors that can control all lighting and fan loads. Unlike other manufacturers, Lutron sensors use Cross Correlation Technology (XCT) to also detect fine motion, such as typing at a desk or reading a book – ensuring lights won’t turn off inadvertently when you’re still in the room.

Meet Lumaris by Lutron. The first professional-grade, tunable white tape light and controller purposely designed to add seamless light performance to the RadioRA 3 and HomeWorks QSX systems.

With power comes great responsibility. Hundreds of workers are killed yearly from electrical shock, and tens of thousands of electrical shock incidents over the past several years resulted in injuries requiring time away from work. Find out how GFCIs, including commercial GFCIs and specialized ones with higher trip levels, effectively prevent such incidents. More Info

The pre-engineered, factory-fabricated Rocket Rack system is designed to exceed the most demanding applications and load requirements. Even better, professional engineered published load ratings are available for tented and standard rack types by part number. Find out the specifics by viewing this informational video!

The ultra thin flange and recessed wiring device reduce the trip hazard caused by plugs protruding from the box. Includes two low voltage openings with built-in divider, ultra-thin stamped steel flange, flush-to-the-floor, in use slotted cover and blank cover.

For easy, flush installation of a receptacle and low voltage ports in a new concrete floor. Heavy-duty 5.5 inch non-metallic concrete floor box has six conduit hubs, four plugs, and multiple slots for positioning two low voltage dividers in the box.

Arlington’s UL Listed gangable concrete floor boxes give installers the economical, convenient way to add receptacles in new concrete pours in commercial installations. Use the single gang box ‘as shipped’ or lock them together to build a two- or three-gang box onsite.

They install from inside or outside a metal panel or metal enclosure, through one of the existing 1/2" knockouts. There’s no need to modify the box or enclosure to accommodate the connector! GC50 and GC75 provide excellent strain relief for grounding conductors. Listed for use with stranded and solid copper and aluminum wire.

Low-cost, economical steel fan/fixture bracket with plastic box delivers super secure, versatile on-center mounting between joists 16" to 24".