Products
Atkore Calconduit/Calbrite/Calbond
Industry's only Stainless EMT Conduit and Fittings

Industry's only Stainless EMT Conduit and Fittings

The Stainless Steel EMT Conduit and Fitting Series simplifies wiring installations to save assembly time and costs. Weighing 58% less than stainless steel rigid conduit and 43% less than IMC, the lightweight EMT conduit not only eases installation, it provides cost savings on shipping.

Manufactured in type 316 stainless steel for increased corrosion resistance, EMT compression fittings, connectors and couplings meet any stringent sanitary conditions. The weatherproof products are designed to ease assembly and increase performance. The EMT connectors are assembled with ferrules, so no separate pieces to purchase or stock. The set screws and set screw fittings provide fixed alignment and positive ground continuity, while allowing easy insertion of grounding conductor for thru or end connection.

EMT compression fittings, connectors and couplings are certified to:

  • Manufactured to UL 514B / ANSI standards
  • NEMA 4X approved

LED Temporary Work Site Lighting
advertisement
BURNDY® WILEY Cable Hanger (WCH) Family

BURNDY® WILEY Cable Hanger (WCH) Family

Cable hangers designed specifically to support up to 8 or 20 wires via mounting or wire management holes in either the module frame or secured around a tracker bolt for a fast, easy one-step hook application.
OSHA Compliant Hole Covers

OSHA Compliant Hole Covers

Arlington’s non-metallic hole cover kits ensure compliance with OSHA standards on a multi-story building site.

They’re available in two sizes. Retaining clips and a reference scale allow for precise sizing of the cover to the hole diameter.

Rated for a 250 lb load, HC1742 fits a 1-3/4" to 4-1/4" opening, HC1762 a 1-3/4" to 6-1/4” hole.

BURNDY® WILEY BMCFS6-1420

BURNDY® WILEY BMCFS6-1420

The BURNDY® WILEY BMFCFS6 mid- and end-clamp is designed specifically to secure FS6 modules through compatibility with the standard mounting slot. An innovative solution with a simple geometry allows for compatibility with most mounting structures and racking systems while providing
ease of installation.
Save Time and Money with Lutron Phase Select Dimming Modules

Save Time and Money with Lutron Phase Select Dimming Modules

Lutron Vive PowPak Phase Select dimming modules offer a remote-mountable, PRO LED+ solution that can be used with any dimmable forward or reverse phase fixture. Providing code-compliant solutions in retrofits or new construction, the module is simple to install, simple to set up, and reduces installation time and callbacks.
BURNDY® Aluminum Parallel Tap

BURNDY® Aluminum Parallel Tap

BURNDY® introduces our aluminum Power Distribution Feed and Tap connector. This family consists of a highly range taking connector designed to accommodate aluminum and copper wire from 1/0 AWG compact to 6 AWG using a single dieless crimp tool for installation.
Download the White Paper

Download the White Paper

Motor disconnects are more than simple on-off devices to satisfy lockout-tagout requirements. They have become an integral part of the motor control circuit, offered in several styles, materials, and ratings. Download our new White Paper to learn more and to see the full line of MENNEKES Disconnects.
Make code-compliant installations simple with Vive Wireless lighting solutions
advertisement
LED Temporary Work Site Light - 100W
advertisement
Newsletter Signup