Products
Mersen
Mersen MHi-T™ Laminated Bus Bars for High Temperature Applications

Mersen MHi-T™ Laminated Bus Bars for High Temperature Applications

Today’s customers are turning to Wide Band Gap (WBG) technologies such as SiC and GaN based power modules to increase power densities in their drives and inverters designs. Due to their inherent nature, WBG modules in turn introduce an increased level of heat into their laminated bus bars connectors. Increased temperature rises on standard laminated bus bars may cause partial or complete breakdown of the bonding agent (glue) of the insulation, causing the insulation to lift and separate from the conductor surface, creating potential unsafe shock or short circuit faults. Mersen aims to address this increased temperature rise in WBG power modules by designing bus bars with higher temperature tolerances.

Using a combination of polyaramid dielectric insulation and high temperature adhesive, and through a long series of testing and qualification steps, today’s Mersen MHi-T High Temperature Bus Bars are designed and manufactured to respond to an increasing demand for higher power levels in power converters.  

While traditional laminated bus bars are limited to a working temperature of 105°C, Mersen MHi-T bus bar line up allows for an increased working temperatures up to 130°C and 180°C.

Features and Benefits
  • Insulation materials expertise and qualification procedure cycle used across all Mersen bus bar sites
  • Three solutions already available @ 105, 130 & 180°C:
    • MHi-T105™
    • MHi-T130™
    • MHi-T180™
  • A fully qualified and standard compliant insulation film offer:
    • REACH and RoHS 
    • CTI (400V)
    • UL94 - Standard for Tests for Flammability of Plastic Materials for Parts in Devices and Appliances V0 certified 
    • EN45545-2 - Fire testing of materials and components for trains, Certified HL3 Class for R1 and R7
Electrical performances
  • Insulation film CTI:  175-250V / Class 3 (Determined by UL)
  • Electrical breakdown:  >8kV
High operating temperature
  • Operating temp.: -50°C to 180°C (Up to 200°C peak)
  • According to UL tests: Insulation film RTI  (220°C)

Slim Design, Dependable Protection
advertisement
Combining Power and Data into a Single Solution

Combining Power and Data into a Single Solution

Appleton™ PlexPower™ Fiber Panel. This cCSAus certified, unique-to-market solution, offers greater configuration flexibility and power safety, which significantly reduces engineering, installation, and cabling costs. As with all of our PlexPower product lines, the PlexPower Fiber panel provides explosion-proof component level protection for standard, off-the-shelf, circuit breakers.
Recessed Floor Box Kit for Existing Floor

Recessed Floor Box Kit for Existing Floor

Arlington’s FLBR5420 RECESSED FLOOR BOX KITS feature two low voltage openings, ultra-thin steel flange, slotted and blank covers for flush-to-floor receptacle installation.

The ultra thin flange and recessed wiring device reduce tripping caused by protruding plugs. Get power and TWO low voltage openings, without a divider. Easy installation with a 5" hole saw.
Custom Conduit Cutting & Packaging

Custom Conduit Cutting & Packaging

ELECTRI-FLEX COMPANY now offers custom conduit cutting and packaging options to product orders. Customers requiring cut lengths of flexible electrical conduit can now have them cut to their required length and have the ends cleaned and deburred. This service is ideally suited for large, multiple cut-piece conduit orders. Items are then packaged and shipped direct to the jobsite.
Economical Galvanized Steel Cable Support

Economical Galvanized Steel Cable Support

Arlington’s economical CUS6 galvanized steel Cable Support holds cable secure and centered on a metal or wood stud.

Installation is quick and easy, and it’s perfect for fastening and positioning up to six individual NM cables – or four metal cables on a 2x4.

Complies with 2020 NEC, article 300.4(D).
Introducing MAC Block Splice & Tap Connectors from ILSCO

Introducing MAC Block Splice & Tap Connectors from ILSCO

Mechanical splice and tap connectors for use with building code and flex conductor. Available in the following colors: purple, black, white, and green. Accepts up to four conductors of varying sizes per port. Certified for power and grounding.
Mersen's FEG Inline Fuse Holders for Street Lighting Applications

Mersen's FEG Inline Fuse Holders for Street Lighting Applications

Mersen’s 600V FEG-21-21 inline fuse holders are ideal for street lighting applications. These fuse holders accommodate 60A Class G fuses. Securing nuts or screws are captive thus speeding installation by reducing the need to locate and assemble loose components in the field. Three internal O-rings per pole seal the fuse holder providing a water-resistant compartment for the fuse.
Temporary Light Strings and Area Lighting
advertisement
The Survival Tool of Dimmers
advertisement