Products
Mersen
Mersen's FEG Inline Fuse Holders for Street Lighting Applications

Mersen's FEG Inline Fuse Holders for Street Lighting Applications

Mersen’s complete line of FEB, FEC, FEG, FEX, and FEY 600 Volt single and dual pole in-line fuse holders accommodate 1-1/2" x 13/32" (10 x 38 mm) midget, Class CC, or Class G fuses.

The fuse holders are designed for quick installation. Securing nuts or screws are captive thus speeding installation by reducing the need to locate and assemble loose components in the field.

Three internal O-rings per pole seal the fuse holder providing a water-resistant compartment for the fuse. The captive O-rings are colored (blue for single pole and red for dual pole) for quick detection.

Optional cone shaped insulator boots can be slipped on to provide a watertight seal (breakaway versions come with boots standard).

Both single and dual pole versions have an optional breakaway feature which safely disconnects the load in case of a pole knockdown. Fuses remain safely encapsulated within the watertight fuse holder on the load side. Once the pole has been reinstalled the fuse holder can be easily reconnected.
Slim Design, Dependable Protection
advertisement
Mersen MHi-T™ Laminated Bus Bars for High Temperature Applications

Mersen MHi-T™ Laminated Bus Bars for High Temperature Applications

Using a combination of polyaramid dielectric insulation and high temperature adhesive, Mersen’s MHi-T™ High Temperature Bus Bars are designed to respond to increased temperature rises in Wide Band Gap technology systems. While traditional laminated bus bars are limited to a working temperature of 105°C, Mersen's MHi-T bus bar line up allows for increased working temperatures up to 180°C.
Combining Power and Data into a Single Solution

Combining Power and Data into a Single Solution

Appleton™ PlexPower™ Fiber Panel. This cCSAus certified, unique-to-market solution, offers greater configuration flexibility and power safety, which significantly reduces engineering, installation, and cabling costs. As with all of our PlexPower product lines, the PlexPower Fiber panel provides explosion-proof component level protection for standard, off-the-shelf, circuit breakers.
Recessed Floor Box Kit for Existing Floor

Recessed Floor Box Kit for Existing Floor

Arlington’s FLBR5420 RECESSED FLOOR BOX KITS feature two low voltage openings, ultra-thin steel flange, slotted and blank covers for flush-to-floor receptacle installation.

The ultra thin flange and recessed wiring device reduce tripping caused by protruding plugs. Get power and TWO low voltage openings, without a divider. Easy installation with a 5" hole saw.
Custom Conduit Cutting & Packaging

Custom Conduit Cutting & Packaging

ELECTRI-FLEX COMPANY now offers custom conduit cutting and packaging options to product orders. Customers requiring cut lengths of flexible electrical conduit can now have them cut to their required length and have the ends cleaned and deburred. This service is ideally suited for large, multiple cut-piece conduit orders. Items are then packaged and shipped direct to the jobsite.
Economical Galvanized Steel Cable Support

Economical Galvanized Steel Cable Support

Arlington’s economical CUS6 galvanized steel Cable Support holds cable secure and centered on a metal or wood stud.

Installation is quick and easy, and it’s perfect for fastening and positioning up to six individual NM cables – or four metal cables on a 2x4.

Complies with 2020 NEC, article 300.4(D).
Introducing MAC Block Splice & Tap Connectors from ILSCO

Introducing MAC Block Splice & Tap Connectors from ILSCO

Mechanical splice and tap connectors for use with building code and flex conductor. Available in the following colors: purple, black, white, and green. Accepts up to four conductors of varying sizes per port. Certified for power and grounding.
The Survival Tool of Dimmers
advertisement
2019 Lutron PRO—Residential
advertisement