Smart, Simple Sensing and Dimming or Switching Control
Smart Sensor
Combines occupancy/vacancy sensing with ON/OFF switching (ODS15)
Smart Sensor App
Easy configuration with the Smart Sensor App; other programming options include an out-of-the-box default mode for auto-ON/auto-OFF operation with a 10-minute timeout as well as convenient pushbutton programming for common room settings.
Smart Sensor with Dimming
Combines occupancy/vacancy sensing with 0-10V dimming (ODD10); 24V model (ODD24) ideal for low voltage applications for use with an OPP20 or OSA20 Power Pack.
Smart Sensors: PIR
Smart Sensors: Multi-Tech
Smart Sensors: No Neutral Wire Required
Smart Sensors: Color Change Kits
Smart Sensors: Dimming: PIR
Smart Sensors: Dimming: Multi-Tech
Smart Sensors: 1000W Dimming: PIR
Smart Sensors: 1000W Dimming: Multi-Tech
Smart Sensors: Dimming Color Change Kits
Smart Sensors: Light Fixture Integrated
Smart Sensors: Antimicrobial Models
Videos
Elevate Your Sensing Control Options with Commercial Grade Smart Sensors
Easy energy savings, local control and code compliance with a single solution. Modernize your space and simplify energy savings with a solution that combines occupancy/vacancy sensing with 0-10V dimming or ON/OFF switching control.
Easy Programming and Configuration
Use the out-of-the-box default mode, convenient pushbutton programming, or the Smart Sensor App. Discover how easy it is to program commercial Smart Wallbox Sensors with pushbutton programming.
Push to Pair for Multi-Location Control
App Programming for Common Configurations & Push-to-Pair for Multi-Location.
Out-of-the-Box Solution
- Simply install and use the out-of-the-box default mode for auto-ON/auto-OFF operation with a 10-minute timeout
- Or take advantage of convenient pushbutton configurations for common room settings
Easy Configuration with the App
- Set operating mode to auto-ON/auto-OFF (occupancy) or manual-ON/auto-OFF (vacancy)
- Adjust sensor sensitivity to increase or decrease the motion sensing zone
- Select timeouts to meet the intent of the space
- Establish daylighting hold-OFF levels
- Activate the nightlight and customize the color to meet space needs and aesthetics
Code Compliance
- Can be used to comply with IECC, ASHRAE 90.1, and Title 24, Part 6 occupancy/vacancy sensing and dimming or manual control requirements
Smart Sensor Solutions Sheet
Elevate Your Sensing Control Options
Frequently Asked Questions
Microphonics | U/S |
---|---|
Passive technology | Active technology |
Can detect sound behind obstructions | Can detect sound behind obstructions |
Can distinguish sounds between human activity from ambient noise | Can’t distinguish sound between human activity from ambient noise |
Consumes less energy | Consumes more energy |
Used in conjunction with PIR | Can be used as standalone technology |
- Yes. Smart Wallbox Sensors have multi-way capabilities for up to 5 devices on all models. Use the Leviton Push to Pair (P2P) process to create a multi-way system. Enable multi-way capabilities with an OTA update for all models.
- There is a lot of flexibility in terms of how the sensors are wired since the 3-way (or more sensors) connections are made using the Bluetooth radio. The sensors can be wired in parallel or can be wired completely separately. They can even be on separate circuits or not connected to a load at all acting more as a remote. As long as they are paired together wirelessly, they will operate in unison with any of the sensors able to pick up motion and any of the sensors can be used to control the lighting manually (ON/OFF or dim up / down).
Select Smart Wallbox Sensors have antimicrobial treated plastic to help keep the device clean. The SAN-BASIC-DASH must be used to order antimicrobial models. See the data sheet for details.
- Simple configurations can be applied using a pushbutton setup for several common pre-configured options. Additionally, the Smart Wallbox Sensors have out-of-the-box default modes:
- Auto-ON/auto-OFF with 20-minute time out
- Sensitivity set to 75%
- Nightlight and daylighting disabled
Yes. The sensors have an integrated photocell for ambient light hold-OFF which can be programmed using the Leviton Smart Sensor App.
The Smart Sensor App opens a complete feature set for the user allowing them to fine-tune the sensor settings per a room’s specifications or energy code requirements.
All Smart Wallbox Sensors are designed with a new digital PIR and lens that is very accurate at detecting motion, even minor motion movements up to 20’ in front of the sensor and 10’ on either side of the sensor. Multi-Tech models can be used when there is no direct line of sight, such as cubicle walls or bathroom stalls.
Leviton offers the ODS15-GDW – a no-neutral wire model.
The Smart Wallbox Sensor can be used to comply with ASHRAE 90.1, IECC and 2022 Title 24. A power pack can be added for plug load control (ODDMT-MLW and ODD24-IDW).
Yes. Users have the option to choose from multiple colors.
- For a manual-ON and auto-OFF room set-up: No, the lights need to be turned ON manually and will only turn OFF automatically.
- For an auto-ON and auto-OFF room set-up: Yes, the lights will turn ON and OFF automatically.
- If the lights do NOT automatically turn ON when you walk two steps into a room, the occupancy sensor is set up for manual-ON/auto-Off lighting control and you will need to manually turn the lights ON.
- If the lights automatically turn ON when you walk into a room, the occupancy sensor is set up for auto-ON/ auto-OFF lighting control.
- Occupancy sensors are not always exact and there are many variables to take into account that may cause the lights to turn OFF inadvertently. This should be an infrequent occurence. We have designed features into the product in order to reduce this occurence.
- Yes, occupancy sensors are equipped with a time delay feature which will start after the last motion is detected. There will be a time delay period of 10, 20 or 30 minutes where the lights will remain ON after the last person was in the room.