Products
Arlington Industries, Inc.
Recessed Floor Box Kit for Existing Floor

Recessed Floor Box Kit for Existing Floor

Arlington’s FLBR5420 series RECESSED FLOOR BOX KITS offer great new features, like two low voltage openings, an ultra-thin stamped steel flange, and flush-to-the-floor in-use and blank covers. Here’s the solution for cost-savings and easy installation of a receptacle and low voltage connections in an existing, hard surface floor.

Because the flange is ultra thin and the wiring device is recessed these floor boxes reduce the trip hazard caused by plugs protruding from the box.
 
You can also have power and now TWO low voltage openings, without the need for a divider, in the same box. That’s convenience!
Installation is quick and easy with a 5" hole saw. Four mounting wing screws attach the 24.5 cubic inch box securely
to the floor.

  • cULus Listed 20A tamper-resistant decorator-style receptacle.
  • Covers in SIX finishes/colors
Metal in brass-plated, nickel-plated  and antique bronze-plated zinc. And powder-coated diecast zinc in black, brown and light almond.
Arlington Fittings for PVC Jacketed MC Cable
advertisement
Mersen MHi-T™ Laminated Bus Bars for High Temperature Applications

Mersen MHi-T™ Laminated Bus Bars for High Temperature Applications

Using a combination of polyaramid dielectric insulation and high temperature adhesive, Mersen’s MHi-T™ High Temperature Bus Bars are designed to respond to increased temperature rises in Wide Band Gap technology systems. While traditional laminated bus bars are limited to a working temperature of 105°C, Mersen's MHi-T bus bar line up allows for increased working temperatures up to 180°C.
Economical Galvanized Steel Cable Support

Economical Galvanized Steel Cable Support

Arlington’s economical CUS6 galvanized steel Cable Support holds cable secure and centered on a metal or wood stud.

Installation is quick and easy, and it’s perfect for fastening and positioning up to six individual NM cables – or four metal cables on a 2x4.

Complies with 2020 NEC, article 300.4(D).
Introducing MAC Block Splice & Tap Connectors from ILSCO

Introducing MAC Block Splice & Tap Connectors from ILSCO

Mechanical splice and tap connectors for use with building code and flex conductor. Available in the following colors: purple, black, white, and green. Accepts up to four conductors of varying sizes per port. Certified for power and grounding.
Mersen's FEG Inline Fuse Holders for Street Lighting Applications

Mersen's FEG Inline Fuse Holders for Street Lighting Applications

Mersen’s 600V FEG-21-21 inline fuse holders are ideal for street lighting applications. These fuse holders accommodate 60A Class G fuses. Securing nuts or screws are captive thus speeding installation by reducing the need to locate and assemble loose components in the field. Three internal O-rings per pole seal the fuse holder providing a water-resistant compartment for the fuse.
New! Sunnata Touch Dimmer with LED+ Advanced Technology

New! Sunnata Touch Dimmer with LED+ Advanced Technology

- Touch or swipe the light bar to set your lights
- Provides superior dimming for LEDs, incandescent and halogens
- Installation is simple, no neutral wire required
- MyLevel personalization: adjust the brightness of the light bar, set a favorite light level

View video
Installation sheet
Product sell sheet
Easy Attachment of Flat NM Cable to Concrete Block

Easy Attachment of Flat NM Cable to Concrete Block

Arlington’s #300 non-metallic cable strap offers the easy way to attach flat NM cable to concrete block. Use it on wood studs too!

Easier to use than a staple or foldover strap for secure positioning, fastening or routing of 14/2 and 12/2 flat NM or UF cable.
Temporary Light Strings and Area Lighting
advertisement
Arlington Cut In Floor Box Kits
advertisement