BURNDY® PATRIOT® IN-LINE® PATMDCUT98 Series of Pole Cutter Tools

BURNDY® LLC
BURNDY® PATRIOT® IN-LINE® PATMDCUT98 Series of Pole Cutter Tools

The new PATMDCUT98 Series BURNDY® PATRIOT® IN-LINE® Pole Cutter has been designed with a 98” overall length offering users both increased flashover protection and extended reach for “live-line, hot-sticking” applications working from inside the aerial bucket or from solid ground.  The new design also incorporates a fixed, non-interchangeable head for increased rigidity and user control. The PATMDCUT98LLIF builds upon the BURNDY PATMD IN-LINE family of tools and is powered by Makita Li-ion batteries for long-lasting power.

Designed for safety, convenience and function, the PATMDCUT98LLIF battery operated tool performs cuts in less than 6 seconds, minimizing exertion and time required when using similar manual or ratchet type models.  Bring the control to your fingertips while safely working with hard to reach, energized overhead or underground lines.

The rocker trigger design allows controlled actuation of the tool when desired and features a safety lock feature to prevent accidental operation of the tool while not in use. Balanced weight distribution allows for a better ergonomic experience compared with similar tools on the market where the majority of the weight is at the top of the pole.

The PATMDCUT98 Series will accept multi-Ah Makita batteries ranging from 2.0Ah through 5.0Ah.  It is offered with 3.0Ah batteries only.

Other Products by BURNDY® LLC

  • BURNDY QuikTap™ Ground Rod Connector

    BURNDY QuikTap™ Ground Rod Connector

    Pre-welded coupling designed to compress onto ground rods.

  • BURNDY® Aluminum Lugs

    BURNDY® Aluminum Lugs

    BURNDY® adds 4 standard width tongue variations to their aluminum compression lug portfolio.
    These new lugs accommodate 500 kcmil, to 1000 kcmil conductor.  Offering an alternative to the existing narrow width tongue pad, these recently introduced terminals feature 2-hole NEMA pad drilling, are UL Listed, CSA Certified, and dual rated for use with copper or aluminum conductor.

  • BURNDY® Compression Pulling Heads

    BURNDY® Compression Pulling Heads

    Only 6 compression pulling heads for wire ranging from #1 AWG – 1000 kcmil for both Aluminum and Copper wire.  Available in 5 different lanyard lengths to stagger the compression pulling heads to prevent overlay.  Only 1 tool required to crimp the entire line!

  • BURNDY Fence Fabric Ground Clamps

    BURNDY Fence Fabric Ground Clamps

    Easily attached to the wire mesh of a chain link fence (barbed wire too), this unique design allows the clamp to form a connection at virtually any angle. Five sizes cover #8 conductor up to 2/0. Installed using a standard torque wrench, these clamps are perfect for electrical or substation contractors to ground their fences.