Electrical Industry Rich-Media Product Demos and Videos

For easy, flush installation of a receptacle and low voltage ports in a new concrete floor. Heavy-duty 5.5 inch non-metallic concrete floor box has six conduit hubs, four plugs, and multiple slots for positioning two low voltage dividers in the box.

Get flush ceiling installations with our heavy duty, plated steel fan/fixture box. It has
an adjustable bracket that mounts securely between joists spaced 16" to 24" o.c. and a score lines on the bracket for ceilings up to 1-1/4" thick.

Arlington's IN BOX™ COVER KITS give installers the best way to install a receptacle in new concrete.

 These COVER KITS are RECESSED and install into the can so they look great and they reduce the trip hazard caused by plugs sticking out of the box.

Simply push the connector into the knockout, and you're done.

 Listed for single or multiple cables, Arlington’s White Button™ NM94X connector offers smooth, easy cable insertion of one or two cables into a single opening from the INSIDE or OUTSIDE of the box.

Arlington’s Steel Floor Box Kits are the easy way to install receptacles flush in a new OR existing floor. Designed for flexibility, these kits offer multiple options for the device setup, and 6" metallic covers with flip lids.

Arlington’s 550 series zinc diecast split grounding bushings deliver convenience and time-savings. They’re split to allow the addition of a bushing AFTER conductors are installed in the conduit.

The gasketed, stainless steel or black stainless TRAPDOOR COVERS look great! They close flush with the floor or countertop, preventing damage to the device in the box and minimizing trip hazards in a floor installation. UL rated for floor installations only.

Here is the easy, NEAT way to mount a single or two-gang box between wood or metal studs with non-standard spacing.

Arlington’s steel SLIDERBAR™ looks great and saves about 20 minutes per box over cutting and nailing extra 2x4s.

Simply plug and charge. No internet connection or software required. Offering up to 48A charging power and are the perfect EV charging solution for residential and commercial applications. Pedestals and mounting options are all made in the USA. Learn what comes in the box when you order an S48 Electrical Vehicle Charger.