BURNDY® Y10 Series Stripper/Cutter hand tools for copper/aluminum #22-#10 AWG

BURNDY® LLC
BURNDY® Y10 Series Stripper/Cutter hand tools for copper/aluminum #22-#10 AWG
BURNDY® Y10 Stripper/Cutter series of hand tools consists of Y101300C cable tie and wire cutting tool and Y101400SC, which is a wire stripping and cutting tool for use on soft metal wires; copper and aluminum ranging from #22 - #10 AWG.

Ergonomically designed, these tools provide custom-designed jaws that eliminate accidental damage to bundles of wire or cables. The high quality heat-treated steel alloy blades provide a crisp cut. Additionally, both tools feature comfort fit, cushioned handles and scissor-action along with auto spring that works with your hand’s national contraction motion, helping to reduce user fatigue.

Other Products by BURNDY® LLC

  • BURNDY® WILEY ACC-F4F Wire Management Clip

    BURNDY® WILEY ACC-F4F Wire Management Clip

    The ACC-F4F is easy to install and slides 90 degrees on to module frames of various thicknesses. The ACC-F4F accommodates 1 to 4 PV cables up to 8.0mm in diameter. The rolled edges are designed to help protect cable insulation from damage.

  • BURNDY® Nest/Indentor Tooling Expansion and UNISPLICE™ Type YDS-RLNI

    BURNDY® Nest/Indentor Tooling Expansion and UNISPLICE™ Type YDS-RLNI

    BURNDY Type YDS-RL UNISPLICE single sleeve full tension splices can now be installed with the reliable 644 Series and recently introduced PAT444S Series family of nest and indentor tools.

  • BURNDY® PATRIOT® PAT444S Series of Crimping Tools

    BURNDY® PATRIOT® PAT444S Series of Crimping Tools

    An extension of the PATRIOT® Battery Actuated Hydraulic Crimping Tool line, the PAT444S is an 11-Ton, C-Head dieless tool made to cross over both utility and commercial/industrial applications.  The PAT444S features a 355° rotatable C-Head design allowing for both easy access and more flexibility when working overhead and in areas of limited access. 

  • BURNDY® CONSTRICTOR™ Ground Connector to Steel

    BURNDY® CONSTRICTOR™ Ground Connector to Steel

    The CONSTRICTOR™ Ground Connector to Steel, GCS26, is used to ground cable to steel in applications where drilling is either not possible or unwanted.

Newsletters Sign-up
Slide left

Welcome to ElectricSmarts

You're in good company!
More than 225,000 electrical professionals use ElectricSmarts to access our eCatalog of 2 million plus products, the latest new product information, videos, spec sheets and more.
Smart eCat - Fully Interactive Electrical Industry Product Catalogs
Email:
We care about your privacy, see our privacy policy.