BURNDY® Compression Pulling Heads

BURNDY® LLC
BURNDY® Compression Pulling Heads
BURNDY® announces the addition of the compression cable pulling head product offering to our HYDENT™ family of compression connectors.

The compression pulling head line makes BURNDY a one-stop-shop for all your cable pulling, terminating, splicing, taping, and installation tooling needs!

Only 6 compression pulling heads for wire ranging from #1 AWG – 1000 kcmil for both Aluminum (Class B [Concentric, Compact, Compressed]) and Copper (Class B [Concentric, Compact, Compressed], and Class C) wire. Each compression pulling head is available in 5 different lanyard lengths, in order to stagger the compression pulling heads to prevent overlay when pulling multiple wire at the same time.

Only 1 tool required to crimp the entire line! To help minimize installation time and minimize the amount of installation tooling requirements, the compression pulling heads have been tested for use with the 644 series of dieless installation tooling. What separates BURNDY from the competition is BURNDY supplies a full line of compression terminals and splices that can also be installed using the 644 installation tooling (see our catalog for connector and tooling combinations).

Other Products by BURNDY® LLC

  • BURNDY® Nylon 12 Cable Ties

    BURNDY® Nylon 12 Cable Ties

    BURNDY Nylon 12 cable ties provide excellent UV, chemical and moisture resistance which allows for a longer life span when used in outdoor applications. The ties feature inside serrations, manufactured from Polyamide 12 with a bent tail allowing for quick and easy installation through the head of the tie. The cable tie has smooth edges to prevent bundle damage.

  • BURNDY Fence Fabric Ground Clamps

    BURNDY Fence Fabric Ground Clamps

    Easily attached to the wire mesh of a chain link fence (barbed wire too), this unique design allows the clamp to form a connection at virtually any angle. Five sizes cover #8 conductor up to 2/0. Installed using a standard torque wrench, these clamps are perfect for electrical or substation contractors to ground their fences.

  • BURNDY® 4” Fence Post Ground Clamp

    BURNDY® 4” Fence Post Ground Clamp

    The new BURNDY fence post grounding connector accommodates 4” square fence posts which are increasingly common for substation security fence applications as well as high security fences surrounding data centers, power plants, and other large industrial facilities.

  • BURNDY® Aluminum Lay-in Lugs for solar panel applications

    BURNDY® Aluminum Lay-in Lugs for solar panel applications

    The new BURNDY aluminum lay-in lugs are for use with frames with a maximum thickness of 1/4 inch and can be used for cable to bus or cable to steel connections where the lay-in feature is necessary. Manufactured using high strength aluminum alloy. The connectors are UL467 and UL2703 Listed.

Welcome to ElectricSmarts

You're in good company!
More than 225,000 electrical professionals use ElectricSmarts to access our eCatalog of 2 million plus products, the latest new product information, videos, spec sheets and more.

Register today and you're entered to
WIN! a $200 Amex gift card.
Email:
We care about your privacy, see our privacy policy.