Mersen MPDB Series: Now Rated for Fine-Strand Wire

Mersen

Mersen

  • Mersen MPDB Series: Now Rated for Fine-Strand Wire
    Mersen MPDB Series: Now Rated for Fine-Strand Wire

    Mersen power distribution blocks provide a safe and easy method of splicing cables, splitting primary power into secondary circuits and fulfilling requirements for fixed junction tap-off points. Many MPDB part numbers are now rated to accept DLO-type fine-strand wire, allowing users to install flexible conductors. UL and CSA approved.

Other Products by Mersen

  • Mersen HP10M and HP15M HelioProtectionTM Fuses with Crimp Cap Termination

    Mersen HP10M and HP15M HelioProtectionTM Fuses with Crimp Cap Termination

    Mersen’s HP10M and HP15M HelioProtection photovoltaic fuses are engineered specifically for the protection of PV systems. Mersen’s new crimp cap termination for HP10M and HP15M fuses enables users to attach wires directly to the fuses. This eliminates the need for a fuse holder and allows an overmolded enclosure. UL Recognized.

  • Mersen Launches New North American Surge Protection Product Line

    Mersen Launches New North American Surge Protection Product Line

    Mersen’s new Surge-Trap® line includes six surge protection products designed and manufactured by Mersen with the latest materials, layouts and components, including the industry leading TPMOV® Technology. All are NEMA devices for ANSI/UL 1449 Type 1 and 2 applications, indoor and outdoor use, and provide UL96A lightning protection.

  • Mersen’s Guide to Major Changes to NFPA 70E Standard

    Mersen’s Guide to Major Changes to NFPA 70E Standard

    NFPA 70E, Standard for Electrical Safety in the Workplace, is becoming the most referenced standard for electrical safety. It's critical to integrate the changes from each new edition into facility safety programs. In this guide, Mersen identifies and explains selected key changes in NFPA 70E, 2015 edition.

  • Mersen HP15G 1500VDC Class G Photovoltaic Fuses

    Mersen HP15G 1500VDC Class G Photovoltaic Fuses

    Mersen's HP15G 1500VDC Class G (10x57mm) Photovoltaic Fuse, designed for low minimum breaking capacity capabilities of 1.35 times the fuse rated current value, allows for safe circuit interruption under typical low fault current conditions produced by PV arrays.

Welcome to ElectricSmarts

You're in good company!
More than 225,000 electrical professionals use ElectricSmarts to access our eCatalog of 2 million plus products, the latest new product information, videos, spec sheets and more.

Register today and you're entered to
WIN! a $200 Amex gift card.
Email:
We care about your privacy, see our privacy policy.