Red•Dot® Stainless Steel While-In-Use Box and Cover System

Thomas & Betts Corporation
Red•Dot® Stainless Steel While-In-Use Box and Cover System

The Red•Dot® Stainless Steel While-In-Use Box and Cover System, new from Thomas & Betts (T&B), protects electrical devices in harsh environments, including those that are susceptible to liquid ingress and corrosion.

The National Electrical Code® (NEC®) requires that electrical wiring devices used in wet locations be protected, even when the cord is plugged into the receptacle. Requirements for outlet box covers have become stricter in recent years in response to demands for durability, especially in high-traffic areas.

Given increasingly stringent requirements imposed by the U.S. Department of Agriculture (USDA), Food and Drug Administration (FDA) and Hazard Analysis Critical Control Point (HACCP), the need for liquid ingress protection and corrosion resistance in electrical devices is particularly acute in the food and beverage processing industry.

The Red•Dot Stainless Steel While-In-Use Box and Cover System is a solution that complies with NEC and UL® requirements for “extra-duty” outlet box covers installed in locations that require wash-down maintenance. The product also is NSF certified. 

The Red•Dot Stainless Steel While-In-Use Box and Cover System is made of 316 stainless steel, which is more corrosion resistant than other types of stainless steel. The system’s smooth, sloped surfaces allow maximum runoff and eliminate water collection points. It is configurable to a variety of sizes and types of outlets.

Other Products by Thomas & Betts Corporation

  • Carlon® Orange Structured Cable Management System

    Carlon® Orange Structured Cable Management System

    The Carlon® Orange Structured Cable Management System (SCMS) from Thomas & Betts (T&B), a member of the ABB Group, makes installation of general-purpose, low-voltage residential cable quicker and facilitates cable replacement as data/communications technology advances.

    The Carlon Orange SCMS is UL® certified and available in ¾-, 1-, 1¼-, 1½- and 2-inch sizes.

  • T&B® Fittings Stainless Steel Conduit and Fittings

    T&B® Fittings Stainless Steel Conduit and Fittings

    T&B® Fittings Sand Cast Aluminum Form 7 Conduit Bodies, from Thomas & Betts (T&B), a member of the ABB Group, are made of CorroStall® aluminum alloy, which is among the most corrosion-resistant aluminum alloys. After 1,200 hours of 5-percent salt fog testing, the conduit bodies remained free of red rust and surface pitting.

  • T&B® Rigid Fittings Stainless Steel Drain Adapter

    T&B® Rigid Fittings Stainless Steel Drain Adapter

    T&B® Rigid Fittings Stainless Steel Drain Adapters from Thomas & Betts facilitate moisture drainage from electrical systems in ordinary locations where threaded connectors are not possible.

    They provide drainage of accumulated moisture in stainless steel enclosures with non-threaded connections, without the need for unsafe and cumbersome welding or improvised breather lines for caulking.

  • Sta-Kon® BAT22-6NV2 electromechanical micro-crimping tool

    Sta-Kon® BAT22-6NV2 electromechanical micro-crimping tool

    Thomas & Betts (T&B) expanded its line of Sta-Kon® wire termination tools with the addition of the battery-operated Sta-Kon BAT22-6NV2 electromechanical micro-crimping tool, which performs approximately 150,000 crimps in its expected service life.

    It includes an extra replacement battery with each unit, and is powered with a high-performance 10.8V lithium-ion battery.

Welcome to ElectricSmarts

You're in good company!
More than 225,000 electrical professionals use ElectricSmarts to access our eCatalog of 2 million plus products, the latest new product information, videos, spec sheets and more.

Register today and you're entered to
WIN! a $200 Amex gift card.
Email:
We care about your privacy, see our privacy policy.