 |
 |
|
Appleton® Areamaster™ Generation 2 LED Luminaires
Designed for harsh industrial and hazardous applications, the Areamaster Generation 2 LED Series provides up to 38,000 lumens and a choice of beam patterns to retrofit HID floodlights from 250W to 1500W. A selection of lumen outputs, color temperatures and diffusion options provide application flexibility while maximizing uniformity and comfort.
|
|
|
|
 |
|
|
BURNDY Fence Fabric Ground Clamps
Easily attached to the wire mesh of a chain link fence (barbed wire too), this unique design allows the clamp to form a connection at virtually any angle. Five sizes cover #8 conductor up to 2/0. Installed using a standard torque wrench, these clamps are perfect for electrical or substation contractors to ground their fences.
|
|
|
|
|
|
|
Greenlee's P2095 & P2096 Reduce Jobsite Injuries
Greenlee’s innovative P2095 and P2096 semi-con cable scoring tools utilize an intuitive blade that rotates clockwise for a spiral cut and counterclockwise for a ring cut around the cable. The P2095 and P2096 eliminate damage to sensitive portions of the cable, and the concealed blade reduces risk of lacerations.
|
|
|
|
|
|
|
Dual-Circuit Wall Switch Sensor Controls Loads from Hubbell
Hubbell’s Dual-Circuit Wall Switch Sensor is a switch replacement solution for situations that require more than one load to be controlled. Occupying the same amount of space as a single-gang wall switch, its depth of just more than 1” provides one of the smallest form factors of any dual-circuit wall switch sensor.
|
|
|
|
|
|
|
Sta-Kon® BAT22-6NV2 electromechanical micro-crimping tool
ABB Installation Products expanded its line of Sta-Kon® wire termination tools with the addition of the battery-operated Sta-Kon BAT22-6NV2 electromechanical micro-crimping tool, which performs approximately 150,000 crimps in its expected service life.
It includes an extra replacement battery with each unit, and is powered with a high-performance 10.8V lithium-ion battery.
|
|
|
|
|
|
|
Steel City® FFPT6 Furniture Feed Poke-Through Floor Box
The Steel City® FFPT6 furniture-feed poke-through floor box is designed to fit 6-inch holes at the second floor and above in commercial buildings, providing maximized capacity for power and communications wiring when feeding modular furniture. It provides a high capacity for electrical and electronic wiring in a single-core drill location.
|
|
|
|
|
|
|
Short on Threads? Go Long.
With Bridgeport's extra-long raintight connectors, you'll have more than enough thread length to accommodate both a locknut and a grounding bushing on thick walled enclosures. Available in 1/2", 3/4" and 1" trade sizes. cULus Listed. Go long and shorten your installation headaches.
|
|
|
|
|
|
|
IDEAL Introduces a new Line of Precision Levels
3.5” and 6” levels feature an integral Thumb Winder™ conduit wheel with a contoured screw designed for non-slip grip and stability. Also available in a 9" Torpedo Level. Corrosion resistant brass screw for easy vial replacement. Oversized neodymium rare earth magnets provide the highest magnetic field strength. Bottom surface features a v-groove.
|
|
|
|
|
|
|
Flush-to-the-Floor Installation with Cut in Box!
CUT IN FLOOR BOX KITS deliver a truly flush installation in an EXISTING floor, although it takes a little longer to install than our DROP IN box.
Round 4” brass or nickel metal covers complete the job. For the neatest finish, a matching oversized ring hides miscut flooring; a carpet ring covers cut carpet.
|
|
|
|
|
