XClamp Tamper-Resistant Receptacle from Hubbell Wiring Device-Kellems Speeds Installation Time

Hubbell Wiring Device - Kellems
XClamp Tamper-Resistant Receptacle from Hubbell Wiring Device-Kellems Speeds Installation Time

Hubbell’s new XClamp Tamper-Resistant Receptacle has an easy, three-step installation, reducing installation time: simply strip, insert, and clamp. An external back-wire clamp eliminates the need to loop the wire. Designed for use with 15- and 20-amp, 14- and 12-gauge wiring, XClamp is ideal for 20-amp branch circuits in residential applications.

To maximize flexibility while minimizing mistakes on residential jobsites, Hubbell Wiring Device-Kellems designed its new XClamp Tamper-Resistant Receptacle with an easy, three-step installation process that eliminates the need to loop the wire.

Installers simply strip, insert, and clamp the XClamp receptacle; compression plates maximize holding power and eliminate the need to loop the wire, saving time and reducing the opportunity for error. An external back-wire clamp ensures fast, easy, and secure installation. This is extremely fast and secure, especially on 20 amp branch circuits where 12-gauge wire is being used.

The tamper-resistant receptacle is designed for use with 15 amp and 20 amp 14-gauge and 12-gauge wiring. With the XClamp, up to eight wires can be terminated for downstream circuits and junctions, reducing the need to pigtail. Break-off tabs for switched receptacles allow for split termination and easy feed through.

The XClamp receptacle is ideal where 20 amp branch circuits are required in residential laundry, bathroom, pantry, breakfast room, and dining room applications, as well as small-appliance branch circuits in residential kitchens.

Other Products by Hubbell Wiring Device - Kellems

  • Hubbell SNAPConnect® modular wiring devices now include full line of single receptacles

    Hubbell SNAPConnect® modular wiring devices now include full line of single receptacles

    15A & 20A, 125V SNAPConnect® single receptacles are offered in both tamper resistant and non-tamper resistant versions. The SNAPConnect® single is also available in specification and hospital grade. SNAPConnect® single receptacles are constructed of abuse-resistant nylon for extra-heavy use applications, such as commercial construction, education, and hospitality environments.

  • 30A Circuit-Lock Disconnect Switch Redefines Safety Benchmarks

    30A Circuit-Lock Disconnect Switch Redefines Safety Benchmarks

    Hubbell’s new 30A motor disconnect switch has six LEDs (3 line side/3 load side). Integral LEDs provide safety and convenience benefits. Electrical status of each phase is within sight and clearly displayed on the cover. Users are provided a secondary way to visually confirm make/break on all phases.  Hubbell refers to this phase-indicating technology as inSIGHT™.

  • Circuit-Lock Motor Disconnects Increase Safety with Jog Switch

    Circuit-Lock Motor Disconnects Increase Safety with Jog Switch

    Hubbell Circuit-Lock Motor Disconnects with Jog Switch offers an improvement to its top-performing enclosed disconnects. The jog-switch provides a momentary “test” and maintained “off” and “run” settings to briefly close the motor circuit and energize a motor for a short period of time providing users cost savings, convenience and added safety.

  • Hubbell Introduces First Pop-Up Receptacle UL Listed for Countertops

    Hubbell Introduces First Pop-Up Receptacle UL Listed for Countertops

    Hubbell Pop-Up Receptacles for countertops provide a power source ideal for kitchen and bath counters and islands. Hubbell is the first to market a counter top receptacle that is UL Listed and water-resistant to half gallon spill. It allows compliance with NEC® 406.5(E) [countertops], 406.5(F) [work surfaces], and 406.5(H) [seating areas].