BURNDY® Compression Pulling Heads

BURNDY® LLC
BURNDY® Compression Pulling Heads
BURNDY® announces the addition of the compression cable pulling head product offering to our HYDENT™ family of compression connectors.

The compression pulling head line makes BURNDY a one-stop-shop for all your cable pulling, terminating, splicing, taping, and installation tooling needs!

Only 6 compression pulling heads for wire ranging from #1 AWG – 1000 kcmil for both Aluminum (Class B [Concentric, Compact, Compressed]) and Copper (Class B [Concentric, Compact, Compressed], and Class C) wire. Each compression pulling head is available in 5 different lanyard lengths, in order to stagger the compression pulling heads to prevent overlay when pulling multiple wire at the same time.

Only 1 tool required to crimp the entire line! To help minimize installation time and minimize the amount of installation tooling requirements, the compression pulling heads have been tested for use with the 644 series of dieless installation tooling. What separates BURNDY from the competition is BURNDY supplies a full line of compression terminals and splices that can also be installed using the 644 installation tooling (see our catalog for connector and tooling combinations).

Other Products by BURNDY® LLC

  • BURNDY QuikTap™ Ground Rod Connector

    BURNDY QuikTap™ Ground Rod Connector

    Pre-welded coupling designed to compress onto ground rods.

  • BURNDY® PATRIOT® IN-LINE ® PATMD-LW Light Weight Series of Tools

    BURNDY® PATRIOT® IN-LINE ® PATMD-LW Light Weight Series of Tools

    The PATMD-LW series weighs just 6.7 lbs. and is only 18.70” in height. This represents a 14% reduction in weight and an 11% overall length reduction compared to the current PATMD series; offering unrivaled ergonomics and comfort. Newly redesigned, robust jaws featuring proprietary locking tabs and a spring release pin.

  • BURNDY® Small Terminal Kits

    BURNDY® Small Terminal Kits

    BURNDY® announces the release of 2 new kits with small terminals and installation tool in durable dual-latch metal case.

    Vinyl-insulated terminals include rings, forks, splices, disconnects, and pin terminals packaged with installation tooling.

  • BURNDY® Aluminum Lugs

    BURNDY® Aluminum Lugs

    BURNDY® adds 4 standard width tongue variations to their aluminum compression lug portfolio.
    These new lugs accommodate 500 kcmil, to 1000 kcmil conductor.  Offering an alternative to the existing narrow width tongue pad, these recently introduced terminals feature 2-hole NEMA pad drilling, are UL Listed, CSA Certified, and dual rated for use with copper or aluminum conductor.