Videos

rss
Electrical Industry Rich-Media Product Demos and Videos


  • Bridgeport's ICE Inside Corner Elbows Provide a New Type of Pull Elbow Installation

    Bridgeport Fittings, Inc.

    Bridgeport's ICE Inside Corner Elbows Provide a New Type of Pull Elbow Installation

    Bridgeport's Patent-Pending ICE Series Inside Corner Elbow is used to connect two lengths of 1/2" EMT to form a 90° change of direction. The Inside corner cover allows for installation in locations where the side or back of the elbow is inaccessible. The cover easily removes using a screwdriver to pop it off, and then it presses back into place by hand.

    Play Video
  • Greenlee® Shear 30T

    Greenlee Textron

    Greenlee® Shear 30T

    The Shear 30T was created to provide an effective and efficient solution to cutting strut and threaded rod. Mounted on a mobile work station, the Shear 30T  eliminates the slow, costly repercussions of cutting with alternative methods. The Shear 30T is hydraulically powered and uses strong interchangeable dies to produce burrless, precise cuts every time.

    Play Video

Most Popular

View All
  • BURNDY® YGHP HYTAP™ Installation Video

    BURNDY® LLC

    BURNDY® YGHP HYTAP™ Installation Video

    Irreversible compression ground tap figure 6 can used as a tap connector or as a tap splice connector. Four die sets and eight connectors can accommodate a conductor range from #8 solid through 500 kcmil plus 1/2", 5/8" and 3/4" copper bonded ground rods.<br><br>See how to install a YGHP connector on 4/0 conductor and #3 rebar.<br>

    Play Video
  • BURNDY® Compression Cable Pull

    BURNDY® LLC

    BURNDY® Compression Cable Pull

    BURNDY is pleased to introduce, an update to our Cable Pull family of products. This updated installation video will guide you through the process of installing the 1 crimp Cable Pull line of products.

    Play Video
  • BURNDY® 304 & 316 Stainless Steel Cable Ties

    BURNDY® LLC

    BURNDY® 304 & 316 Stainless Steel Cable Ties

    These ties are manufactured from non-magnetic 316 or 304 Stainless Steel for extra corrosion resistance, perfect for use in indoor and outdoor applications, extreme conditions and hazardous areas. These products meet the requirements of ABS.

    Play Video
  • Hubbell Wiring Device-Kellems: Marine Electrical Products

    Hubbell Wiring Device - Kellems

    Hubbell Wiring Device-Kellems: Marine Electrical Products

    Electrical products for the Marine market. Including wiring devices, outlets, ship-to-shore cord sets, adapters USB Charging and GFCI products.<br><a href="https://www.hubbell.com/wiringdevice-kellems/en/hubbell-marine">More Info</a><br>

    Play Video
  • Hoffman Angled Trough Customer Testimonial

    nVent Hoffman

    Hoffman Angled Trough Customer Testimonial

    Greg Bills talks about how the new Hoffman Angled Trough cuts total installation time by 80%, and eliminates the need for costly 90-degree conduit bends.

    Play Video
  • Hubbell Wiring Device-Kellems: How to Install the Xclamp Duplex Receptacle

    Hubbell Wiring Device - Kellems

    Hubbell Wiring Device-Kellems: How to Install the Xclamp Duplex Receptacle

    The xClamp duplex receptacle eliminates the need to loop the wire and has an external back-wire clamp for quick and installation. Compression plates maximize holding power to provide a stronger, more secure connection.

    Play Video