Mersen’s Fusible Shunt Trip Switch

Mersen
Mersen’s Fusible Shunt Trip Switch

Mersen’s Fusible Shunt Trip Switch is an all-in-one solution that meets required codes for safety in elevator shafts. This UL-Listed control panel offers remote load-break capability and fuse protection for elevator circuits. An array of available options allows for maximum functionality to be built into a single compact panel.

Mersen’s fusible shunt trip switch is a UL Listed industrial control panel offering remote load-break disconnection capability to emergency circuits. An array of available options allows for maximum functionality to be built into a single compact panel. Panels built for elevator applications feature control transformers (fusing both primary and secondary sides), a fire safety interface relay with a fire alarm voltage monitoring relay, and mechanically interlocked auxiliary contacts. Use of Mersen’s Amp-Trap 2000® AJT Class J fuses permits easy selective coordination, while providing the panel and its components with superior current limitation and the ability to withstand high fault conditions. AJT fuses provide added system reliability since no maintenance or periodic testing is required as with other electromechanical overcurrent devices.

Other Products by Mersen

  • Mersen’s New and Improved STP Series – Featuring a 75kA Surge Rating

    Mersen’s New and Improved STP Series – Featuring a 75kA Surge Rating

    Mersen introduces an upgrade of the Surge-Trap® Pluggable Series SPDs, improving overvoltage protection for DIN-Rail applications. The new product features an industry-leading 75kA surge capacity rating, while using Mersen’s patented TPMOV technology inside. Optional remote indication, expanded wire gauge range from 4-14 AWG, MIL-STD-810E vibration tested.

  • Mersen MPDB Series: Now Rated for Fine-Strand Wire

    Mersen MPDB Series: Now Rated for Fine-Strand Wire

    Mersen power distribution blocks provide a safe and easy method of splicing cables, splitting primary power into secondary circuits and fulfilling requirements for fixed junction tap-off points. Many MPDB part numbers are now rated to accept DLO-type fine-strand wire, allowing users to install flexible conductors. UL and CSA approved.

  • Facility-Wide Protection with Mersen’s Surge-Trap® STZ Series

    Facility-Wide Protection with Mersen’s Surge-Trap® STZ Series

    The Surge-Trap Type 1 STZ Series features surge capacities up to 450kA designed with Mersen’s industry leading TPMOV® technology inside. Options include a NEMA 4X enclosure, surge counter, through-the-door disconnect switch, audible alarm, dry contact, and EMI/RFI filtering. SPD can be installed on the line or load side of the service entrance.

  • Mersen HP10M and HP15M HelioProtectionTM Fuses with Crimp Cap Termination

    Mersen HP10M and HP15M HelioProtectionTM Fuses with Crimp Cap Termination

    Mersen’s HP10M and HP15M HelioProtection photovoltaic fuses are engineered specifically for the protection of PV systems. Mersen’s new crimp cap termination for HP10M and HP15M fuses enables users to attach wires directly to the fuses. This eliminates the need for a fuse holder and allows an overmolded enclosure. UL Recognized.