BURNDY® OEM175 Pneumatic Crimping Press

BURNDY® LLC
BURNDY® OEM175 Pneumatic Crimping Press
The OEM175 pneumatic crimping press is used to terminate small terminals on mylar tape reels. This compact bench top unit is perfect for small to medium volume OEMs including wire harness shops and panel builders.

Designed to terminate #22-#10 AWG terminals on mylar tape, the OEM175 features an auto feed mechanism along with a 2-stage ram for accurate conductor placement. Safety features include a clear guard with interlock switch to prevent access into crimp area during operation and an emergency release switch.

Other Products by BURNDY® LLC

  • BURNDY® NEMA Spaced Panel Board Lugs

    BURNDY® NEMA Spaced Panel Board Lugs

    The new BURNDY terminals feature NEMA-standard spacing (1/2″ diameter stud holes spaced 1-3/4″ apart). Two sizes with range taking conductor ports cover from #2 AWG through 750 kcmil, the conductor ports are in a stacked arrangement to save space. Each size offers a configuration to accommodate 2, 3, or 4 conductors.

  • BURNDY® WILEY ACC-F4F Wire Management Clip

    BURNDY® WILEY ACC-F4F Wire Management Clip

    The ACC-F4F is easy to install and slides 90 degrees on to module frames of various thicknesses. The ACC-F4F accommodates 1 to 4 PV cables up to 8.0mm in diameter. The rolled edges are designed to help protect cable insulation from damage.

  • BURNDY Wiley TELECOM WEEB® WASHER - Equipment Bonding

    BURNDY Wiley TELECOM WEEB® WASHER - Equipment Bonding

    The WILEY Telecom WEEB® Washer is an innovative design which utilizes patented WEEB® Washer teeth that eliminate the need to remove nonconductive coatings (e.g. paint and powder coat) when making a bonding connection.

  • BURNDY® Y10 Series Stripper/Cutter hand tools for copper/aluminum #22-#10 AWG

    BURNDY® Y10 Series Stripper/Cutter hand tools for copper/aluminum #22-#10 AWG

    BURNDY® Y10 Stripper/Cutter series of hand tools consists of Y101300C cable tie and wire cutting tool and Y101400SC, which is a wire stripping and cutting tool for use on soft metal wires; copper and aluminum ranging from #22 - #10 AWG.