-
IPEX USA LLC
Hinged Cover Scepter JBox
The Hinged Cover Scepter JBox opens more than 200° for complete and easy access to devices and instruments.NEMA 3R and 4X rated, it ideally suited for indoor and outdoor industrial, MRO and OEM applications and in wash-down environments. 100% non-metallic, it includes all the features that users have come to appreciate in the Scepter JBox.
View -
IPEX USA LLC
Scepter® JBox™ Pole Mount Kit
Save time installing a junction box onto utility power poles! Suitable for both indoor and outdoor use, the universal Pole Mount Kit consists of galvanized steel brackets and stainless steel straps and is designed to work with wooden, concrete, steel and fibreglass poles of round, square and octagonal shape up to 15" in diameter.
View -
IPEX USA LLC
Scepter JBox…the easiest junction box you’ll ever use!
We’ve completely redesigned the original junction box making the NEW Scepter JBox the easiest box to use – no matter the situation. The Scepter JBox features an integral gasket, non-metallic fasteners, molded mounting feet, embossed grid-lines and flat cover...all designed to save contractors time and money on the jobsite.
View -
IPEX USA LLC
SceptaCon’s New Joint Design
The re-engineered SceptaCon Trenchless Raceway joint contains internal features which gradually stop the spigot during insertion to prevent bottoming out within the bell, avoiding the possibility of over insertion.
View
SceptaCon is a proven splinelocking system designed for horizontal direction drilling. Approved for a 65’ bend radius – SceptaCon can bend around obstacles like rocks and other utilities. -
IPEX USA LLC
Service Entrance Fittings
Scepter® Service Entrance Fittings can be used in both overhead and underground service laterals and are resistant to a wide range of chemicals such as acids, alkalis or salt solutions.
View
A complete range of non-corroding PVC service entrance fittings are available, including meter hubs, weather heads and meter offsets.
-
IPEX USA LLC
Kwikon Slab Box with Dual Mount System
Kwikon® ENT Standard Slab Boxes feature our new dual mounting system. The corner mounting tabs are uniquely positioned to guide the nails into a position inside the fixture’s trim cover, reducing the threat of visible rust bleeding through the finished ceiling. Approved for ceiling fans up to 35 lbs.
View
-
IPEX USA LLC
Slab Box Installation Made Easy
All Deep Round Series Kwikon slab boxes feature our new CORNER MOUNTING TABS which allow contractors to easily nail Kwikon slab boxes to the slab deck. The angled design guides the nail inside the fixture’s trim cover reducing the threat of visible rust bleeding through the finished ceiling. Traditional center mount is also available.
View -
IPEX USA LLC
Kwikon® 90º Stub Down Fittings
Kwikon Stub Down Fittings create a stub down of ENT without penetrating the form. After the concrete pour the permanently encased fitting is flush with the bottom of the slab deck, ready to accept the connection of ENT raceway. Easy to install, Kwikon Stub Downs offer optimal height (3 3/8”) and bend radius (2 ½”).
View
- panelboards
- mobile apps
- locks
- surge
- end caps
- NEMA 4 enclosures
- test sets
- alarms
- tv box
- compression connectors
- wall sensors
- flexible electrical conduit
- transfer switches
- SPD suppressors
- M12 molded connectors
- contractor software
- seated power boxes
- fiber optic testers
- cord grips
- dimmers
- M12 ethernet molded connectors
- seal fittings
- emergency lighting
- splice
- weatherproof boxes
- cable cutters
- wire management
- weatherproof in-use covers
- usb receptacle
- track lighting
