Calbond PVC Coated Conduit 2017

Calpipe Industries
Calbond PVC Coated Conduit 2017
Calbond PVC coated rigid steel conduit is used for highly corrosive environments. The coating will provide corrosion protection and mechanical protection. Ground continuity is maintained throughout the installation.

Features:

  • Exterior PVC coating thickness is a minimum 0.040"
  • Interior urethane coating thickness is a minimum 0.002"
  • Specialized corrosion resistant coating provided on threads
  • Sizes available are ½" to 6"
  • Color coded thread protectors
  • Couplings shipped with conduit are packaged separately
  • Hot Dipped Galvanized HDG conduit
Standards:

Calbond conduit is UL listed with both the PVC coating as a primary protection and the Hot Dipped Galvanized HDG zinc coating as the primary protection per UL6. PVC coated conduit is restricted for use with threaded fittings only (threadless connector not permitted).

UL Listings and Compliances:

  • Calbond PVC coated conduit is UL/CUL listed in accordance to UL6 &   ANSI C80.1 Standards
  • Calbond PVC coated conduit is UL/CUL listed rigid ferrous metal conduit with polyvinyl chloride   coating verified for PVC adhesion performance
  • Calbond PVC coated conduit complies with NEMA RN-1
  • UL File Number E226472

Other Products by Calpipe Industries

  • Make Your Facility a "BRITE" Facility

    Make Your Facility a "BRITE" Facility

    Calbrite proudly offers BriteRail, a new, innovative design in conduit support systems for sanitary and wash-down environments commonly found in food processing and pharmaceutical industries.

  • Calbond PVC Coated - Special Bends

    Calbond PVC Coated - Special Bends

    Calbond provides customers with "special bend" capabilities with lead times between 24 to 72 hours. Standard threading & bending capabilities are available in PVC coated galvanized and aluminum with diameters ranging from 0.5” – 6.0” and radii of 12.0”.  Special large-radii bending capabilities offer custom segment bends.

  • Calbond Form 8 Conduit Bodies Earn NEMA 4X Rating

    Calbond Form 8 Conduit Bodies Earn NEMA 4X Rating

    Calbond Form 8 Conduit Bodies feature sleeved threaded ends, a minimum exterior PVC coating thickness of .040”, minimum interior urethane coating thickness of .002”, and specialized corrosion resistant coating applied to all threads.  All Calbond Form 8 Fittings are NEMA 4X Rated, UL 514B Listed, and meet CSA Standard C22.2 No.18.

  • New Calbond XJG Expansion Joints

    New Calbond XJG Expansion Joints

    Calbond's PVC Coated XJG Expansion Joints are used in long-term conduit runs where horizontal movement may occur due to thermal expansion or contraction. The XJG Expansion Joint provides protection from buckling, allowing for either 4´´ or 8´´ horizontal movement. They feature an internal bonding jumper only, with no external bumper eliminating the need for disassembly.