XClamp Tamper-Resistant Receptacle from Hubbell Wiring Device-Kellems Speeds Installation Time

Hubbell Wiring Device - Kellems
XClamp Tamper-Resistant Receptacle from Hubbell Wiring Device-Kellems Speeds Installation Time

Hubbell’s new XClamp Tamper-Resistant Receptacle has an easy, three-step installation, reducing installation time: simply strip, insert, and clamp. An external back-wire clamp eliminates the need to loop the wire. Designed for use with 15- and 20-amp, 14- and 12-gauge wiring, XClamp is ideal for 20-amp branch circuits in residential applications.

To maximize flexibility while minimizing mistakes on residential jobsites, Hubbell Wiring Device-Kellems designed its new XClamp Tamper-Resistant Receptacle with an easy, three-step installation process that eliminates the need to loop the wire.

Installers simply strip, insert, and clamp the XClamp receptacle; compression plates maximize holding power and eliminate the need to loop the wire, saving time and reducing the opportunity for error. An external back-wire clamp ensures fast, easy, and secure installation. This is extremely fast and secure, especially on 20 amp branch circuits where 12-gauge wire is being used.

The tamper-resistant receptacle is designed for use with 15 amp and 20 amp 14-gauge and 12-gauge wiring. With the XClamp, up to eight wires can be terminated for downstream circuits and junctions, reducing the need to pigtail. Break-off tabs for switched receptacles allow for split termination and easy feed through.

The XClamp receptacle is ideal where 20 amp branch circuits are required in residential laundry, bathroom, pantry, breakfast room, and dining room applications, as well as small-appliance branch circuits in residential kitchens.

Other Products by Hubbell Wiring Device - Kellems

  • Hubbell announces new 3-in-1 SNAPConnect® Circuit Tester

    Hubbell announces new 3-in-1 SNAPConnect® Circuit Tester

    Hubbell’s exclusive SNAPConnect® Circuit Tester checks the wiring of straight-blade receptacles, SNAPConnect® receptacle terminals and verifies that GFCI receptacles are wired and functioning correctly. Easy-to-read lights immediately report the state of the circuit. The label clearly interprets the readings, indicating if the wiring connections have been made properly and helping to diagnose errors.

  • On-the-Go Powered Seating Boxes from Hubbell Wiring Device-Kellems Offer Power Accessibility in Limited Spaces

    On-the-Go Powered Seating Boxes from Hubbell Wiring Device-Kellems Offer Power Accessibility in Limited Spaces

    Hubbell's new Powered Seating Boxes fulfill customers' need for convenient power accessibility. Providing an easy means of charging user's devices while meeting custom space requirements, seating boxes can easily be attached to waiting area seating arrangements, conference tables, lecture halls, or anywhere convenient power is needed.

  • 30A Circuit-Lock Disconnect Switch Redefines Safety Benchmarks

    30A Circuit-Lock Disconnect Switch Redefines Safety Benchmarks

    Hubbell’s new 30A motor disconnect switch has six LEDs (3 line side/3 load side). Integral LEDs provide safety and convenience benefits. Electrical status of each phase is within sight and clearly displayed on the cover. Users are provided a secondary way to visually confirm make/break on all phases.  Hubbell refers to this phase-indicating technology as inSIGHT™.

  • Circuit-Lock Motor Disconnects Increase Safety with Jog Switch

    Circuit-Lock Motor Disconnects Increase Safety with Jog Switch

    Hubbell Circuit-Lock Motor Disconnects with Jog Switch offers an improvement to its top-performing enclosed disconnects. The jog-switch provides a momentary “test” and maintained “off” and “run” settings to briefly close the motor circuit and energize a motor for a short period of time providing users cost savings, convenience and added safety.