BURNDY® Ground Studs and Cover

BURNDY® LLC
BURNDY® Ground Studs and Cover

BURNDY® Ground Studs and Cover.  All-in-one Ball and Socket Design with NEMA Pad.

The BURNDY® GSC series of ground studs; GSC752N30B, GSC752N30B45, and GSC752N30B90, are used to create a personal protective path to ground in the event of a fault. These ground studs incorporate an in-line NEMA spacing pad and are available in straight, 45°, and 90° variations.

The GSC series of ground studs can be used with industry-standard 30mm ball and socket, duckbill, and c-clamp style grounds clamps. The optional GSC7530BCOVER provides a snug fit when not in use and also serves as animal mitigation. Other styles of ground clamps may be created upon request, contact your BURNDY sales representative or our Londonderry, New Hampshire-based Customer Service Team for more information.

Other Products by BURNDY® LLC

  • BURNDY® Aluminum Lugs

    BURNDY® Aluminum Lugs

    BURNDY® adds 4 standard width tongue variations to their aluminum compression lug portfolio.
    These new lugs accommodate 500 kcmil, to 1000 kcmil conductor.  Offering an alternative to the existing narrow width tongue pad, these recently introduced terminals feature 2-hole NEMA pad drilling, are UL Listed, CSA Certified, and dual rated for use with copper or aluminum conductor.

  • BURNDY Fence Fabric Ground Clamps

    BURNDY Fence Fabric Ground Clamps

    Easily attached to the wire mesh of a chain link fence (barbed wire too), this unique design allows the clamp to form a connection at virtually any angle. Five sizes cover #8 conductor up to 2/0. Installed using a standard torque wrench, these clamps are perfect for electrical or substation contractors to ground their fences.

  • BURNDY® Finger-Safe Kits used with VERSIPOLE™ Configurable Power Distribution Blocks

    BURNDY® Finger-Safe Kits used with VERSIPOLE™ Configurable Power Distribution Blocks

    BURNDY® Finger-Safe Kits are used in conjunction with the VERSIPOLE™ Configurable Series Power Distribution Blocks. These Finger-Safe Kits contain translucent polycarbonate top covers and end plates. They are used to convert Open Style VERSIPOLE™ distribution blocks to the Finger-Safe style or to add poles to existing Finger-Safe models.

  • BURNDY® Clear Insulated Multi-Tap Connectors for Fine Stranded Conductor

    BURNDY® Clear Insulated Multi-Tap Connectors for Fine Stranded Conductor

    An expansion to the UNITAP™ Insulated Multi-Tap connector family. In addition to a full line of UV-rated black, clear, direct burial, and submersible connectors, the line now contains a full offering of connectors that are UL Listed to the UL Wire Connector Standard UL486A-486B and CSA Certified for use with Flexible (Fine Stranded) Conductor.