T-Box™ for Suspended Ceiling Grids

Arlington Industries, Inc.
T-Box™ for Suspended Ceiling Grids
Arlington’s new economical T-Box™ is the cost-effective way to mount a fan or fixture on a suspended ceiling grid.

What’s neat about this T-Box... it can be positioned on the ceiling grid at the cross of the T-rails – or on the straight away so YOU decide where you want the fan/fixture!
 
Uses include fans and fixtures of course, but also smoke and carbon monoxide detectors, security cameras, exit signs and emergency lighting.

And they’re easy to install!  Simply cut around the ceiling tile. Then lower the box into place onto the ceiling grid where it’s held securely in place. For use on premium/reveal edge ceiling
tiles, the box height adjusts by removing the tabs with pliers...
easy and convenient!

  • 28.0 cu inch box, available in two styles: FB428SC with a metal hanger for fans and fixtures up to 70 lbs... F428SC with a plastic hanger for fixtures (only) up to 50 lbs. Both include an installed NM cable connector.
  • UL Listed
  • Meets 2017 NEC, section 314.27 for fan and fixture boxes

Other Products by Arlington Industries, Inc.

  • Economical Floor Box Cover Kits..ultra-thin flanges for flush installation

    Economical Floor Box Cover Kits..ultra-thin flanges for flush installation

    Arlington’s Listed IN BOX™ Recessed Cover Kits install receptacles, flush, in a 4.5"concrete floor box.

    Save 20% Brass- or nickel-plated metal covers have ultra-thin, stamped steel flanges. Recessed covers install in the box, to reduce tripping. Easy installation, with a divider for power and low voltage in the same box.

  • Non-Metallic Concrete Box has Added Features!

    Non-Metallic Concrete Box has Added Features!

    Made of heavy-duty plastic, Arlington's FLBC4502 4.5" non-metallic concrete floor box has SIX conduit hubs, FOUR plugs - and THREE options for positioning the low voltage divider in the box.

    Arlington’s floor boxes, accessories and cover kits - including our new FLBC4580 IN BOX™ covers - are the low cost, way to install a receptacle flush in a new concrete floor.

  • Gangable Floor Box with PLASTIC covers

    Gangable Floor Box with PLASTIC covers

    With Arlington's Listed, economical gangable concrete floor box kits you build the box you need - onsite. Single gang, non-metallic boxes lock together to create a two- or three-gang box that accommodates a PLASTIC cover (5 colors) or diecast zinc cover with brass or nickel finish. Plus, covers install with the hinge on either side.

  • Prevent air-infiltration with Nail-on Vapor Box for devices

    Prevent air-infiltration with Nail-on Vapor Box for devices

    Arlington's UL Listed, non-conductive Vapor Box (FN101F) for devices has pre-attached flange gaskets that prevent air infiltration inside, and help meet International Energy Conservation Codes (IECC).

    Plus, it offers easy nail-on installation in new construction using single 1/2" or 5/8" drywall. Ultra-thin alignment tabs mean there’s NO drywall bulge.

    2-hour Fire Rating.