BURNDY Undrilled Braid Line

BURNDY® LLC
BURNDY Undrilled Braid Line
BURNDY announces innovative undrilled braid line bringing unparalleled field flexibility while retaining cULus Listing.

Undrilled seamless pure copper ferrules are supplied with scored lines and dimples. Scored lines locate the center of the ferrule and prevent the drill from walking when drilling in this area. Dimples at the end of the scored lines represent the location of the NEMA standard hole spacing. Drill the holes you need, where you need them, using the supplied guide and the cULus Listing is retained!

BURNDY undrilled braids offer a field flexible solution for almost any application!

Other Products by BURNDY® LLC

  • BURNDY® Announces the KAP / KAPO line of Innovative Mechanical Pin Adaptors

    BURNDY® Announces the KAP / KAPO line of Innovative Mechanical Pin Adaptors

    BURNDY is the first to market this innovative product which provides customers with an alternative means of terminating conductor into mechanical connectors typically found in switch gear, breakers, and other electrical equipment. The KAP / KAPO type connectors are a supplement to the AYP / AYPO aluminum compression adaptors.

  • BURNDY® Announces redesigned HPS-LWMAG Series of Hydraulic Long Reach Pole Chain Saws

    BURNDY® Announces redesigned HPS-LWMAG Series of Hydraulic Long Reach Pole Chain Saws

    The HPS-LWMAG Series of Hydraulic Long Reach Pole Chain Saws is available in two overall lengths; 75" and 88".  These new pole chain saws have been designed with weight reduction, increased balance, ergonomics, user comfort and performance in mind.

  • BURNDY® PATRIOT® IN-LINE ® PATMD-LW Light Weight Series of Tools

    BURNDY® PATRIOT® IN-LINE ® PATMD-LW Light Weight Series of Tools

    The PATMD-LW series weighs just 6.7 lbs. and is only 18.70” in height. This represents a 14% reduction in weight and an 11% overall length reduction compared to the current PATMD series; offering unrivaled ergonomics and comfort. Newly redesigned, robust jaws featuring proprietary locking tabs and a spring release pin.

  • BURNDY® Compression Pulling Heads

    BURNDY® Compression Pulling Heads

    Only 6 compression pulling heads for wire ranging from #1 AWG – 1000 kcmil for both Aluminum and Copper wire.  Available in 5 different lanyard lengths to stagger the compression pulling heads to prevent overlay.  Only 1 tool required to crimp the entire line!