New Product News Results

rss
118 Products Found

Page 1 | 2 | 3 | 4 | 5 | 6 | 7 ... 15 | >>

  • BURNDY Fence Fabric Ground Clamps

    BURNDY® LLC

    BURNDY Fence Fabric Ground Clamps

    Easily attached to the wire mesh of a chain link fence (barbed wire too), this unique design allows the clamp to form a connection at virtually any angle. Five sizes cover #8 conductor up to 2/0. Installed using a standard torque wrench, these clamps are perfect for electrical or substation contractors to ground their fences.

    View
  • BURNDY® HandyBug™ Connector

    BURNDY® LLC

    BURNDY® HandyBug™ Connector

    The HandyBug™ connector is UL Listed, CSA Certified, and Direct Burial rated. Sizes accommodate from #10 AWG Solid to #2 AWG Solid or #2 AWG Stranded to 1/0 AWG and feature a two hole tongue. The HandyBug™ connector functions as a split bolt, splice, or a termination for wires to a bus bar or other flat surface.

    View
  • BURNDY® Finger-Safe Kits used with VERSIPOLE™ Configurable Power Distribution Blocks

    BURNDY® LLC

    BURNDY® Finger-Safe Kits used with VERSIPOLE™ Configurable Power Distribution Blocks

    BURNDY® Finger-Safe Kits are used in conjunction with the VERSIPOLE™ Configurable Series Power Distribution Blocks. These Finger-Safe Kits contain translucent polycarbonate top covers and end plates. They are used to convert Open Style VERSIPOLE™ distribution blocks to the Finger-Safe style or to add poles to existing Finger-Safe models.

    View
  • BURNDY® 4” Fence Post Ground Clamp

    BURNDY® LLC

    BURNDY® 4” Fence Post Ground Clamp

    The new BURNDY fence post grounding connector accommodates 4” square fence posts which are increasingly common for substation security fence applications as well as high security fences surrounding data centers, power plants, and other large industrial facilities.

    View
  • BURNDY® Aluminum Lay-in Lugs for solar panel applications

    BURNDY® LLC

    BURNDY® Aluminum Lay-in Lugs for solar panel applications

    The new BURNDY aluminum lay-in lugs are for use with frames with a maximum thickness of 1/4 inch and can be used for cable to bus or cable to steel connections where the lay-in feature is necessary. Manufactured using high strength aluminum alloy. The connectors are UL467 and UL2703 Listed.

    View
  • BURNDY® Clear Insulated Multi-Tap Connectors for Fine Stranded Conductor

    BURNDY® LLC

    BURNDY® Clear Insulated Multi-Tap Connectors for Fine Stranded Conductor

    An expansion to the UNITAP™ Insulated Multi-Tap connector family. In addition to a full line of UV-rated black, clear, direct burial, and submersible connectors, the line now contains a full offering of connectors that are UL Listed to the UL Wire Connector Standard UL486A-486B and CSA Certified for use with Flexible (Fine Stranded) Conductor.

    View
  • BURNDY® SMARTVISE® Portable Conduit Stud Vise

    BURNDY® LLC

    BURNDY® SMARTVISE® Portable Conduit Stud Vise

    This portable conduit stud vise, conveniently attaches to the top of any standard 5 gallon utility bucket for safe use when cutting 1/2”, 3/4”, and 1” diameter piping or EMT conduit, and studs up to 2”x4”.

    Sold in pairs, the SMARTVISE® features a rugged steel design with an electro-coated black finish to prevent chipping and corrosion.

    View
  • BURNDY® WIREMIKECI

    BURNDY® LLC

    BURNDY® WIREMIKECI

    The BURNDY® WIREMIKECI is easily accessible and can confirm any finished crimp when using butting “U” dies crimped with BURNDY 750, 46, 39, and 35 series of installation tools. This tool is used in a variety of applications when verifying the size of stranded, solid, and DLO (Diesel Locomotive) wire for Copper and Concentric and Compact wire for Aluminum.

    View

Page 1 | 2 | 3 | 4 | 5 | 6 | 7 ... 15 | >>