Arlington Steel Fan/Fixture Box

Arlington Industries, Inc.
Arlington Steel Fan/Fixture Box
Arlington's UL/CSA Listed heavy-duty Steel Fan/Fixture Box with fully adjustable mounting brackets installs securely between existing wood I-beams or rafters. The new FBRS40712R fits beams or rafters set 12 to 16 inches on center and complements our FBRS407R pan box, which fits I-beams or rafters set 16 to 24 inches on center.

Features
  • One-Piece Design No Parts to lose. Bracket installation and adjustment screws ship captive.
  • Convenient Fits 1/2" or 5/8" drywall ceilings. The 8.0 cu. in. box can be positioned anywhere along the bracket for centering of fan or fixture.
  • Easy Mounting in Retrofit Work
  • UL/CSA Listed
    UL rated: 35 lb fan, 50 lb fixture;
    CSA rated: 50 lb fan or fixture
Includes: Box/bracket, screws to adjust box position, installed NM cable connector, multiple KOs, and two screws for fan/fixture bracket installation
(screwed in place until removed by installer).

Other Products by Arlington Industries, Inc.

  • Economical Floor Box Cover Kits..ultra-thin flanges for flush installation

    Economical Floor Box Cover Kits..ultra-thin flanges for flush installation

    Arlington’s Listed IN BOX™ Recessed Cover Kits install receptacles, flush, in a 4.5"concrete floor box.

    Save 20% Brass- or nickel-plated metal covers have ultra-thin, stamped steel flanges. Recessed covers install in the box, to reduce tripping. Easy installation, with a divider for power and low voltage in the same box.

  • T-Box for Suspended Ceiling Grids

    T-Box for Suspended Ceiling Grids

    Arlington’s UL Listed T-Box, in TWO styles, is the easy, cost-effective way to mount a fan/fixture on a suspended ceiling grid – at the cross or on the straightaway.

    FB428SC (metal hanger) holds up to 70 lbs.
    F428SC (plastic hanger) for fixtures (only) up to 50 lbs.

    Other uses: smoke/carbon monoxide detectors, security cameras, exit signs, emergency lighting.

  • Recessed Box Kit for Existing Floors

    Recessed Box Kit for Existing Floors

    Arlington’s NEW FLBR5420 RECESSED FLOOR BOX KITS feature two low voltage openings, ultra-thin stamped steel flange, flush-to-the-floor in-use and blank covers.

    An ultra thin flange and recessed wiring device reduce the trip hazard caused by protruding plugs. You’ll have power and TWO low voltage openings, without a divider. Easy Installation with a 5" hole saw.

  • Floor Box Cover Kits with Ultra-thin steel flanges deliver flush installation

    Floor Box Cover Kits with Ultra-thin steel flanges deliver flush installation

    Arlington’s Listed IN BOX™ Recessed Cover Kits install receptacles, flush, in a 4.5"concrete floor box.

    Economical brass- or nickel-plated metal covers have ultra-thin, stamped steel flanges. Recessed covers install in the box, to reduce tripping. Easy installation, there’s a divider for power and low voltage in the same box.