N2LED: The New Standard for Reliable Emergency Egress Lighting

Appleton Grp LLC
N2LED: The New Standard for Reliable Emergency Egress Lighting
During an unanticipated power failure, you need instant-on emergency egress lighting that delivers plenty of brightness without draining the battery before you can secure the safety of workers and equipment. It’s also helpful to have compact emergency lighting that is easy to install in any location – including tight corridors and catwalks – without getting in the way. Plus, it should require minimal maintenance over the months or even years when it may not be needed – and still operate with absolute reliability when it is needed.

Emerson™ has achieved these goals with the energy efficient Appleton™ N2LED Series Emergency Egress Luminaires. Certified for Class I, Division 2 and Zone 2 hazardous locations, the N2LED provides up to 180 minutes of bright white lighting with no degradation in light quality over the full run-time. The enclosed and gasketed design features a compression molded fiberglass reinforced polyester housing (NEMA 4X, IP66) for rugged reliability in areas exposed to dust, dirt, water, marine salts and corrosives.

The master unit of the system is available without or with two light heads, and remote units are available with one or two light heads – providing a choice of one to four light heads for each complete master/remote system. All light heads can be precisely adjusted in the field with no need for resealing – so you can quickly and easily aim emergency lighting for up to four areas, and make further adjustments or relocate the system anytime as your needs change.

Your facility lighting needs to be reliable in day to day operation. In critical situations, that reliability needs to be absolute. Get the assurance you need with Appleton™ N2LED Series Emergency Egress Luminaires by Emerson™, your industrial and hazardous location lighting experts.

Other Products by Appleton Grp LLC

  • Get best-in-class LED performance with the next generation of our proven Areamaster™ LED

    Get best-in-class LED performance with the next generation of our proven Areamaster™ LED

    With recent advancements in efficiency and more rugged engineering of LED luminaries, the harsh industrial and hazardous location industries are poised for widespread adoption of this exciting technology. Emerson is leading the way with its Appleton™ Areamaster™ LED Generation 2 floodlights.

  • Easy to Retrofit Explosionproof A-51™ LED Luminaires

    Easy to Retrofit Explosionproof A-51™ LED Luminaires

    The Appleton™ A-51™ LED Luminaires by Emerson are designed for Groups A, B, C, D areas. The A-51™ LED fits in the same mounting hoods as traditional Appleton™ A-51™ luminaires with no rewiring, for an easy lighting upgrade.  They provide all the benefits of LED technology for lower mounting heights.

  • NEMA Type 4 Watertight 15 and 20 Amp Plugs When Unmated

    NEMA Type 4 Watertight 15 and 20 Amp Plugs When Unmated

    Equipment and plugs used in hazardous and industrial locations are often left outdoors, being subjected to wet, damp, and corrosive conditions. The Appleton™ U-Line™ Interchanger 15 and 20 Amp Plugs by Emerson™ deliver power to portable and permanent equipment and have a NEMA Type 4 watertight certification rating when unmated.

  • Appleton™ PlexPower™ Motor Starters

    Appleton™ PlexPower™ Motor Starters

    Building on the technology of Appleton™ PlexPower™ Panelboards, Emerson now offers component level protection for off-the-shelf motor starters. Delivering Class I, Division 2, Groups B, C and D NEC and CEC certifications in a Type 4X rated enclosure, PlexPower™ Motor Starters provide superior electrical apparatus protection, control and convenience, in hazardous, wet, and corrosive environments.