Contact Us: 1-800-233-4717 Find Arlington on Facebook Follow Arlington on Twitter Visting Arlington on YouTube Visting Arlington's Media Service
Join Our Email List!
Arlington | DROP IN™ Floor Box Kits



NEW from Arlington

DROP IN™ Floor Box Kits

Fastest Installation in Existing Floors


Arlington's UL Listed DROP IN™ Floor Box Kits are the fastest way to install a box nearly flush in an existing floor. They install with a single hole saw and sit just about 1/8" off the floor. DROP IN™ boxes accommodate most 3.5" standard covers, but Arlington's low-profile covers seat flush into the non-metallic ring, reducing trip hazards.



Features

• Brass or Nickel-Plated Metal covers have two gasketed flip
  lids that keep water out and protect the box.
  Kits include: Non-metallic box, round 4" diameter metal
  cover with flip lids, non-metallic gasket support plate,
  gasket, carpet ring, UL Listed 15 amp TR duplex receptacle,
  mounting bracket, NM94 and NM95 cable connectors,
  (3) #8 x 1/2" flat head screws and (1) #6 x 1/2" screw.

Non-Metallic Blank Covers Perfect for covering unused
  receptacles. To use the receptacle, simply remove the blank
  cover. Available in five decorator colors: dark brown,
  light almond, gray, caramel, black—each one with a
  matching non-metallic mounting bracket, gasket, and
  carpet ring.

  Kits include: Non-metallic box, round 4" diameter
  non-metallic blank cover, non-metallic gasket support
  plate, gasket, carpet ring, UL Listed 15 amp TR duplex
  receptacle, mounting bracket, NM94 and NM95 cable
  connectors, (3) #8 x 1/2" flat head screws
  and (1) #6 x 1/2" screw.


Installation Instructions

1. Determine box location, taking care to avoid structural
   framing members. Using hole saw, cut 4-1/4" diameter
   opening through floor and sub floor.

2. Insert mounting bracket. Using indicator marks, align
   bracket for proper receptacle orientation. Tighten (3) wing
   screws to secure bracket to floor.

3. Pull cable. Install in box with supplied cable connector.
   Attach box to bracket with (3) #8 x 1/2" sheet metal screws
   (supplied) through the U-shaped cut-outs in the box flange.

4. Wire receptacle. Install in box. Attach supplied gasket
    support plate to receptacle with #6 x 1/2" screws.

5. & 6. Cover Installation Install gasket. Attach metal or
   non-metallic blank cover to box with (3) #8 x 1/2" flat head
   machine screws.
   Note: When using the in-use non-metallic cover, substitute the
   colored in-use plate for the black gasket support plate.


Download the Specification Sheet Watch the Product Video

How to Buy

Contact an Arlington Sales Representative

Purchasing in Canada? Please click here to contact our Canadian Representatives.