Allied Moulded Products, Inc.
Mind the Gap: Air-Sealing Options for Exterior Wall Outlets
Residential energy use today accounts for about 20% of U.S. greenhouse
gas emissions – though this figure varies widely by region and income
level. Certainly, getting more of our energy from renewable resources
can help reduce those emissions, but we also need to limit overall
energy demand in order to meet the emissions cuts necessary to blunt
climate change’s worst effects.
Lutron Electronics Co., Inc.
Install 3-way Lighting Control Without Needing Traveler Wires
I’ll bet this has happened to you. You’re elbows deep in a wiring
project, or lost in a trance-like state, figuring out a major
troubleshooting problem.
Suddenly, a tap on the shoulder and a quiet “excuse me” interrupts you, sending a jolt right down your spine.
Mersen
Know the Devices That Do – and Don’t – Meet NEC’s New Surge Protection Requirements
Whole-home surge protection has become a much bigger issue for
residential electrical contractors in the last year as local authorities
have begun adopting the 2020 edition of the National Electrical Code
(NEC).
Lutron Electronics Co., Inc.
Simple Strategies to Reduce Energy
In new construction, sustainable building practices are becoming the
norm. But even in existing buildings, simple strategies can be
implemented quickly and easily to address inefficiencies, reduce energy
use, improve comfort, and enhance productivity in the space.
Legrand/Pass & Seymour
Less Work to Meet Safety Requirements
Some facilities are changing their requirements for motor and appliance
installations. This could be due to OSHA Lock-out and Tag-out
requirements or NFPA 70E. The change is toward using pin and sleeve
devices instead of having a hard-wired installation.
Safety requirements often have the maintenance person checking for the
absence of voltage before touching. The rules are quite specific and are
enforced by OSHA.
Panduit Corp
Uninterruptible Power Supply (UPS) – No Battery, Maintenance-Free
The Uninterruptible Power Supply (UPS) uses 24VDC input/output to
provide 35W of power and 5 to 15 minutes Hold Time and is designed for
critical networking and control applications such as industrial managed
switches and human machine interfaces (HMI’s). The Industrial UPS uses
Ultracapacitors instead of batteries, eliminating the #1 cause of
conventional UPS failures, which lowers the risk of downtime - and
there’s no need for costly and time consuming maintenance.
