BURNDY® Announces the KAP / KAPO line of Innovative Mechanical Pin Adaptors

BURNDY® LLC
BURNDY® Announces the KAP / KAPO line of Innovative Mechanical Pin Adaptors
BURNDY is the first to market this innovative product which provides customers with an alternative means of terminating conductor into mechanical connectors typically found in switch gear, breakers, and other electrical equipment. The KAP / KAPO type connectors are a supplement to the AYP / AYPO aluminum compression adapters.

Consisting of 3 range taking sizes that accommodate a wire range from #6 to 750 kcmil, each size is offered in a center pin and off-centered pin design. Off-centered pins can be rotated to prevent interference when installing conductors side-by-side in limited space applications. Insulated covers are provided with each connector to prevent contact between it and uninsulated live parts of opposite polarity or grounded metal. The KAP / KAPO type mechanical pin adapters are UL Listed for use with Flex (fine stranded) conductor.

Other Products by BURNDY® LLC

  • BURNDY® WILEY ACC-F4F Wire Management Clip

    BURNDY® WILEY ACC-F4F Wire Management Clip

    The ACC-F4F is easy to install and slides 90 degrees on to module frames of various thicknesses. The ACC-F4F accommodates 1 to 4 PV cables up to 8.0mm in diameter. The rolled edges are designed to help protect cable insulation from damage.

  • BURNDY® Y10 Series Stripper/Cutter hand tools for copper/aluminum #22-#10 AWG

    BURNDY® Y10 Series Stripper/Cutter hand tools for copper/aluminum #22-#10 AWG

    BURNDY® Y10 Stripper/Cutter series of hand tools consists of Y101300C cable tie and wire cutting tool and Y101400SC, which is a wire stripping and cutting tool for use on soft metal wires; copper and aluminum ranging from #22 - #10 AWG.

  • BURNDY® PATRIOT® PAT444S Series of Crimping Tools

    BURNDY® PATRIOT® PAT444S Series of Crimping Tools

    An extension of the PATRIOT® Battery Actuated Hydraulic Crimping Tool line, the PAT444S is an 11-Ton, C-Head dieless tool made to cross over both utility and commercial/industrial applications.  The PAT444S features a 355° rotatable C-Head design allowing for both easy access and more flexibility when working overhead and in areas of limited access. 

  • BURNDY® Announces redesigned HPS-LWMAG Series of Hydraulic Long Reach Pole Chain Saws

    BURNDY® Announces redesigned HPS-LWMAG Series of Hydraulic Long Reach Pole Chain Saws

    The HPS-LWMAG Series of Hydraulic Long Reach Pole Chain Saws is available in two overall lengths; 75" and 88".  These new pole chain saws have been designed with weight reduction, increased balance, ergonomics, user comfort and performance in mind.