Mersen Video Highlights TPMOV® Technology

Mersen
Mersen Video Highlights TPMOV® Technology

Mersen’s groundbreaking TPMOV (Thermally Protected Metal Oxide Varistor) technology is illustrated in this informative video. TPMOV, patented by Mersen, is the backbone of Mersen's extensive surge protection product line. TPMOV eliminates common destructive failure modes associated with standard MOVs and this video illustrates the many features of the TPMOV product.

Mersen's TPMOV is quite simply, the most popular, best performing, consistent quality product available on the market. The video features 3D schematics of how TPMOV operates, as well as a side-by-side comparison of TPMOV and MOV technology. The device has a standard 50kA surge capacity rating and a premium option with a 75kA rating.

It's easy to see how TPMOV technology has confirmed Mersen as an innovator and leader in the surge protection market and why, since its introduction in 2005, Mersen has sold and shipped over 10 million units worldwide!

Matt Sawyer, product manager with Mersen explains, "You can clearly see the harmful effects a thermal runaway state creates and how, by comparison, the TPMOV disconnects safely upon sensing a thermal runaway situation, thereby saving equipment from catastrophic failure. This shows how important TPMOV technology is when it comes to safely protecting electrical equipment under abnormal voltage conditions."

TPMOV is a key component of Mersen's portfolio of surge protective devices (SPDs). All of Mersen's SPD offerings are UL1449 4th edition recognized components and in addition, the portfolio offers a 200kA short circuit current rating and does not require any back-up fusing. Mersen's SPD portfolio can accommodate continuous operating voltages ranging from 150 volts to 550 volts AC, with a wide variety of optional accessories, features, and mounting configurations.

Other Products by Mersen

  • Mersen's Groundbreaking DC Overcurrent Protection Solutions

    Mersen's Groundbreaking DC Overcurrent Protection Solutions

    Mersen is pleased to announce the expansion of its portfolio of electrical protection components with the release of a groundbreaking series of DC Overcurrent Protection Solutions specifically designed to safely clear both high and low DC fault currents for today’s demanding DC systems in EV/HEV and Electrical Energy Storage applications.

  • Mersen’s New and Improved STP Series – Featuring a 75kA Surge Rating

    Mersen’s New and Improved STP Series – Featuring a 75kA Surge Rating

    Mersen introduces an upgrade of the Surge-Trap® Pluggable Series SPDs, improving overvoltage protection for DIN-Rail applications. The new product features an industry-leading 75kA surge capacity rating, while using Mersen’s patented TPMOV technology inside. Optional remote indication, expanded wire gauge range from 4-14 AWG, MIL-STD-810E vibration tested.

  • Mersen’s Guide to the 2017 National Electrical Code®

    Mersen’s Guide to the 2017 National Electrical Code®

    The National Electrical Code, NFPA 70, is published every three years and the experts at Mersen have reviewed the code for important changes to surge and overcurrent protection. Download Mersen’s Guide to the 2017 National Electrical Code for the latest information on critical changes and how Mersen products can help you address these updates.

  • Mersen MPDB Series: Now Rated for Fine-Strand Wire

    Mersen MPDB Series: Now Rated for Fine-Strand Wire

    Mersen power distribution blocks provide a safe and easy method of splicing cables, splitting primary power into secondary circuits and fulfilling requirements for fixed junction tap-off points. Many MPDB part numbers are now rated to accept DLO-type fine-strand wire, allowing users to install flexible conductors. UL and CSA approved.