Steel City® RPT6 Recessed Poke-Through Floor Box

Thomas & Betts Corporation
Steel City® RPT6 Recessed Poke-Through Floor Box

Steel City® RPT6 recessed poke-through floor boxes, new from Thomas & Betts (T&B), provide maximized capacity for power and communications wiring in single-core drill locations at the second floor and above in commercial buildings.

The recessed service conceals devices below the floor level for 6-inch holes.

The Steel City RPT6 recessed poke-through floor box is compatible with off-the-shelf wiring devices, while its center compartment will accept GFCI outlets, as well as 20-amp and 30-amp twist-lock devices. The configurable compartment bottom junction box includes four plates enabling a contractor or specifier to run varying sizes of conduit through 1 ¼-, 1 ½- or 2-inch knockouts. Units are available with solid brass, brushed aluminum or black covers.

The Steel City RPT6 recessed poke-through floor box is rated for the UL® 263 two-hour fire test.

All T&B floor boxes are now available prewired and preconfigured though the eFab™ department.

Other Products by Thomas & Betts Corporation

  • Ty-Fast® Ag+® bacteria-resistant cable ties

    Ty-Fast® Ag+® bacteria-resistant cable ties

    Ty-Fast® Ag+® bacteria-resistant cable ties, new from Thomas & Betts (T&B), a member of the ABB Group, are the industry’s first cable ties to inhibit microbial growth, which helps to reduce infection rates and the spread of bacteria. Testing indicated that common bacteria on the cable ties’ surfaces is reduced by more than 99.9 percent.

  • T&B Liquidtight Systems™ flexible metal conduit

    T&B Liquidtight Systems™ flexible metal conduit

    T&B Liquidtight Systems™ flexible metal conduit, from Thomas & Betts, a member of the ABB Group, complements T&B Liquidtight Systems fittings to provide a complete system solution for wet and corrosive environments.

    T&B Liquidtight Systems components are tested to the same global standards as enclosures to ensure a liquidtight installation in demanding applications.

  • Carlon® Fittings

    Carlon® Fittings

    Carlon® fittings from Thomas & Betts (T&B), a member of the ABB Group, are among the only non-metallic fittings for electrical boxes that can be installed from either the inside or outside of the box.

    The new Carlon fittings are UL® Listed and CSA™ certified, and are certified for one or two sheathed cables.

  • T&B® Cable Tray Flexible Coupler Kit

    T&B® Cable Tray Flexible Coupler Kit

    The T&B® Cable Tray flexible coupler kit from Thomas & Betts (T&B) features a bendable plate that allows for electrical continuity, which eliminates the need for a bonding jumper.

    The flexible coupler kit also provides maximum horizontal installation flexibility and easy installation that eliminates the need for cutting cable tray side rails.