BURNDY® Compression Pulling Heads

BURNDY® LLC
BURNDY® Compression Pulling Heads
BURNDY® announces the addition of the compression cable pulling head product offering to our HYDENT™ family of compression connectors.

The compression pulling head line makes BURNDY a one-stop-shop for all your cable pulling, terminating, splicing, taping, and installation tooling needs!

Only 6 compression pulling heads for wire ranging from #1 AWG – 1000 kcmil for both Aluminum (Class B [Concentric, Compact, Compressed]) and Copper (Class B [Concentric, Compact, Compressed], and Class C) wire. Each compression pulling head is available in 5 different lanyard lengths, in order to stagger the compression pulling heads to prevent overlay when pulling multiple wire at the same time.

Only 1 tool required to crimp the entire line! To help minimize installation time and minimize the amount of installation tooling requirements, the compression pulling heads have been tested for use with the 644 series of dieless installation tooling. What separates BURNDY from the competition is BURNDY supplies a full line of compression terminals and splices that can also be installed using the 644 installation tooling (see our catalog for connector and tooling combinations).

Other Products by BURNDY® LLC

  • BURNDY® PATRIOT® IN-LINE ® PATMD-LW Light Weight Series of Tools

    BURNDY® PATRIOT® IN-LINE ® PATMD-LW Light Weight Series of Tools

    The PATMD-LW series weighs just 6.7 lbs. and is only 18.70” in height. This represents a 14% reduction in weight and an 11% overall length reduction compared to the current PATMD series; offering unrivaled ergonomics and comfort. Newly redesigned, robust jaws featuring proprietary locking tabs and a spring release pin.

  • BURNDY® PATRIOT® IN-LINE® PATMDCUT98 Series of Pole Cutter Tools

    BURNDY® PATRIOT® IN-LINE® PATMDCUT98 Series of Pole Cutter Tools

    The new PATMDCUT98 Series BURNDY® PATRIOT® IN-LINE® Pole Cutter has been designed with a 98” overall length offering users both increased flashover protection and extended reach for “live-line, hot-sticking” applications working from inside the aerial bucket or from solid ground.

  • BURNDY® Ground Studs and Cover

    BURNDY® Ground Studs and Cover

    BURNDY® Ground Studs and Cover.  All-in-one Ball and Socket Design with NEMA Pad.

    The BURNDY® GSC series of ground studs; GSC752N30B, GSC752N30B45, and GSC752N30B90, are used to create a personal protective path to ground in the event of a fault.

  • BURNDY Fence Fabric Ground Clamps

    BURNDY Fence Fabric Ground Clamps

    Easily attached to the wire mesh of a chain link fence (barbed wire too), this unique design allows the clamp to form a connection at virtually any angle. Five sizes cover #8 conductor up to 2/0. Installed using a standard torque wrench, these clamps are perfect for electrical or substation contractors to ground their fences.